Građevinar, Vol. 69 No. 05., 2017.
Pregledni rad
https://doi.org/10.14256/JCE.1916.2016
Optimization of compressed stiffened flanges in bridge box girder cross section
Anđelko Vlašić
Nijaz Mujkanović
Sažetak
Due to bending, flanges of steel box girder cross sections act as compression plates and require stiffeners. Using stability evidence from EN 1993-1-5, a parametric study was performed for six different types of stiffeners. The obtained diagrams show design buckling resistance stress for various plate width and thickness values, and the type and number of stiffeners. Furthermore, an optimization process was performed to find the most suitable types and number of stiffeners, depending on the acting design compression force. Optimization parameters are the minimum steel area and minimum number of stiffeners.
Ključne riječi
bridge; steel box; compression flange; buckling; stiffening; reduced stress method
Hrčak ID:
183245
URI
Datum izdavanja:
20.6.2017.
Posjeta: 2.393 *