Tehnički vjesnik, Vol. 25 No. 3, 2018.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20171120121636
Machining of Spur Gears Using a Special Milling Cutter
Piotr Boral
orcid.org/0000-0002-4561-4124
; Czestochowa Univertsity of Technology, Ul. Dąbrowskiego 69, 42-201 Częstochowa, Poland
Antun Stoić
; Mechanical Engineering Faculty, J. J. Strossmayer Univertsity of Osijek, Trg Ivane Brlić Mažuranić 2, HR-35000 Slavonski Brod, Croatia
Milan Kljajin
orcid.org/0000-0002-9291-4111
; Mechanical Engineering Faculty, J. J. Strossmayer Univertsity of Osijek, Trg Ivane Brlić Mažuranić 2, HR-35000 Slavonski Brod, Croatia
Sažetak
Spur gears have a wide application in the machine-building industry. Machining process primarily selected for these gears is hobbing method with modular hobs, or with Fellows cutters. Other methods which can be applied are profiling using the pull broaches, while the finishing can be done by gear shaving or grinding by the Maag, Niles or Reishauer methods. Moreover, in small (or unit) production, they may be formed using disc- or finger-type modular cutters. The article presents a method for cutting spur gears using a disc-type mill with a variable cutting plate profile. The influence of the number of blades of the presented milling cutter on the accuracy of the worked tooth profile was investigated.
Ključne riječi
disc-type milling cutter, gear machining, surface roughness
Hrčak ID:
202623
URI
Posjeta: 3.852 *