Izvorni znanstveni članak

https://doi.org/10.17559/TV-20180123115758

Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method

Abuajila Raweni ; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11020 Belgrade 35, Serbia
Vidosav Majstorović ; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11020 Belgrade 35, Serbia
Aleksandar Sedmak orcid.org/0000-0002-5438-1895 ; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11020 Belgrade 35, Serbia
Srdjan Tadić ; Innovation Center of the Faculty of Mechanical Engineering, Kraljice Marije 16, 11020 Belgrade 35, Serbia
Snežana Kirin ; Innovation Center of the Faculty of Mechanical Engineering, Kraljice Marije 16, 11020 Belgrade 35, Serbia

Sažetak

In this study, Taguchi design was applied to find out the optimized set of friction steel welding parameters in terms of total crack energy, crack initiation energy, and crack propagation energy in weldments. Taguchi approach was used to design a set of welding experiments concerning rotational welding speed, traversing speed, and tool tilt angle. Welding variables were analyzed by means of Taguchi orthogonal arrays and signal-to-noise ratio analysis to find the optimum welding parameters. ANOVA analysis was used to determine the influence between each of these parameters.

Ključne riječi

ANOVA analysis; crack initiation energy; crack propagation energy; friction stir welding; Taguchi method

Hrčak ID:

202632

URI

https://hrcak.srce.hr/202632

Datum izdavanja:

28.6.2018.

Posjeta: 2.449 *