Građevinar, Vol. 70 No. 05., 2018.
Pregledni rad
https://doi.org/10.14256/JCE.2181.2017
Introduction of recycled polyurethane foam in mastic asphalt
Miguel Ángel Salas
Heriberto Pérez-Acebo
Sažetak
The aim of this paper is to analyse the suitability of recycled polyurethane (PU) foam as a binder modifier in mastic asphalts (MA). The results show that harder bitumen is achieved with an increasing percentage of PU, up to 5 %, when the workability of the sample becomes poor. A MA mix with a 4 % of PU in bitumen was manufactured. A lower indentation was observed when compared to a virgin sample, and it was established that the modified MA can be used on heavy-traffic roads. These results suggest a promising use of this waste polymer.
Ključne riječi
polyurethane foam; mastic asphalt; bitumen modifier; polymer modified bitumen; indentation test
Hrčak ID:
203425
URI
Datum izdavanja:
9.7.2018.
Posjeta: 2.370 *