Izvorni znanstveni članak
https://doi.org/10.15177/seefor.18-04
Soil Measurements in the Context of Planning Harvesting Operations and Variable Climatic Conditions
Andreja Đuka
orcid.org/0000-0002-2505-713X
; University of Zagreb, Faculty of Forestry, Department of Forest Engineering, Svetošimunska 25, HR-10000 Zagreb, Croatia
Tomislav Poršinsky
; University of Zagreb, Faculty of Forestry, Department of Forest Engineering, Svetošimunska 25, HR-10000 Zagreb, Croatia
Tibor Pentek
; University of Zagreb, Faculty of Forestry, Department of Forest Engineering, Svetošimunska 25, HR-10000 Zagreb, Croatia
Zdravko Pandur
orcid.org/0000-0003-4046-1349
; University of Zagreb, Faculty of Forestry, Department of Forest Engineering, Svetošimunska 25, HR-10000 Zagreb, Croatia
David Janeš
orcid.org/0000-0002-2999-4999
; University of Zagreb, Faculty of Forestry, Department of Forest Engineering, Svetošimunska 25, HR-10000 Zagreb, Croatia
Ivica Papa
orcid.org/0000-0003-2462-1605
; University of Zagreb, Faculty of Forestry, Department of Forest Engineering, Svetošimunska 25, HR-10000 Zagreb, Croatia
Sažetak
Background and Purpose: Terrain trafficability and vehicle mobility during timber extraction are highly influenced by terrain characteristics, as well as by soil bearing capacity. Insufficient planning, too heavy vehicles, excessive traffic, poor soil knowledge, together with bad weather conditions, cause severe disturbance to forest soil. Damage to the forest ecosystem arises due to felling and timber extraction operations, regardless of the technical means used in this process. Traffic intensity plays an essential role in soil compaction because deformations can increase with the number of passes, which may lead to excessive soil disturbance.
Materials and Methods: The research was conducted in Zalesina, a hilly and pre-mountainous part of Gorski kotar, Croatia, in two management units (MUs) comprising of 569.64 ha of selective beech and fir forests. Physical and mechanical properties of forest soil, essential for vehicle mobility and terrain trafficability during timber extraction are based on measuring the following soil parameters: 1) soil penetration resistance, 2) soil shear strength, and 3) current soil moisture. Measurements were made during one calendar year, on five sampling plots (three in MU "Belevine" and two in MU "Kupjački vrh") chosen on the prevailing soil types in both MUs.
Results: The highest values of cone index and shear strength were recorded in July which was the warmest and driest month with only 7 rainy days. Current soil moisture was the lowest in July at φ=15.26% vol, while the lowest values of cone index were from October to January with precipitation at its climax from September to January with cumulative 1232 mm of rain and 846 cm of snow. Lower values of penetration resistance were in MU "Kupjački vrh" at 0.96 MPa, which is related to overall terrain structure of high karst and surface roughness, making the sampling of plots difficult. By comparing cone index values (CI15) and the mean values between 5 and 25 cm of depth (CI5-25), the variation coefficient indicates a lower variability of CI5-25 values on four out of five sampling plots. However, t-test showed no statistically significant difference between these soil parameters.
Conclusions: Data regarding soil bearing capacity in a map form as an additional layer to other maps of stand characteristics would ensure better opportunities for planners or operators to reduce and avoid rutting and soil compaction. Measured data on penetration resistance, soil shear strength and current soil moisture have not only given in a simple and a fast manner the in situ stand conditions, but they have also shown their dependence on climatic conditions.
Ključne riječi
digital penetrometer; cone index; soil shear strength; precipitation; soil moisture content
Hrčak ID:
203557
URI
Datum izdavanja:
30.6.2018.
Posjeta: 1.174 *