Izvorni znanstveni članak

https://doi.org/10.5552/drind.2018.1752

Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies)

Peter Rantuch orcid.org/0000-0001-5826-8323 ; Slovačko tehnološko sveučilište u Bratislavi, Fakultet za znanost i tehnologiju materijala, Trnava, Slovačka
Jozef Martinka orcid.org/0000-0002-0060-5785 ; Slovačko tehnološko sveučilište u Bratislavi, Fakultet za znanost i tehnologiju materijala, Trnava, Slovačka
Igor Wachter orcid.org/0000-0003-0691-0462 ; Slovačko tehnološko sveučilište u Bratislavi, Fakultet za znanost i tehnologiju materijala, Trnava, Slovačka

Sažetak

This paper deals with the effect of thermal treatment of spruce wood on its burning process. Samples of 100 mm x 100 mm were dried out and then heat-treated at 150 °C, 200 °C, 250 °C and 300 °C. Thus prepared samples were tested on a cone calorimeter at a heat flow of 50 kW·m-2. The obtained results clearly show that with the increasing temperature of the treatment, the released heat from the surface unit decreases and the unit weight increases. The carbon dioxide concentration in the flue gas increases as well, however, the optical density of the smoke decreases substantially. It can be stated that the burning of spruce wood is considerably affected mainly by the thermal treatment at temperatures above 200 °C. From the point of view of the use of spruce wood as fuel, the most optimal treatment temperature is 250 °C.

Ključne riječi

torrefaction; Picea abies wood; heat flux; heat release

Hrčak ID:

206352

URI

https://hrcak.srce.hr/206352

Datum izdavanja:

4.10.2018.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.903 *