Tehnički vjesnik, Vol. 26 No. 2, 2019.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20180122105145
Numerical-Experimental Determination of Stress and Deformation State in Connecting Lugs with the Effect of Contact Area Size
Đorđe Đurđević
; College of Applied Engineering Studies in Belgrade, Nade Dimić 4, 11080 Zemun, Serbia
Nina Anđelić
; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11000 Belgrade, Serbia
Taško Maneski
; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11000 Belgrade, Serbia
Vesna Milošević-Mitić
; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11000 Belgrade, Serbia
Andrijana Đurđević
; College of Applied Engineering Studies in Belgrade, Nade Dimić 4, 11080 Zemun, Serbia
Pejo Konjatić
; Mechanical Engineering Faculty in Slavonski Brod, Trg Ivane Brlić Mažuranić 2, HR-35000 Slavonski Brod, Croatia
Sažetak
The present paper describes numerical and experimental methodology for the analysis of stress and deformation state in structural elements with geometrical discontinuities. The research is based on structural elements of the connecting lug type. The stress and deformation state was determined as the contact area size between the axle and the connecting lug was changing. Numerical analysis was conducted by applying the finite element method in a ''KOMIPS'' software package. Experiments were performed at the Laboratory for stress and deformation measurements, Faculty of Mechanical Engineering, University of Belgrade, using ''GOM'' equipment and ''ARAMIS'' software application (DIC). This paper demonstrates how it is possible to anticipate the results by applying FEM. A short review of current research in the field of structural elements with geometrical discontinuities is given within the framework of the paper.
Ključne riječi
connecting lug; DIC; FEM; stress concentration; strain measurement
Hrčak ID:
219516
URI
Datum izdavanja:
24.4.2019.
Posjeta: 1.937 *