Drvna industrija, Vol. 70 No. 2, 2019.
Izvorni znanstveni članak
https://doi.org/10.5552/drvind.2019.1902
Effect of Pine (Pinus Sylvestris) Bark Dust on Particleboard Thickness Swelling and Internal Bond
Sergej Medved
orcid.org/0000-0002-6189-4867
; Sveučilište u Ljubljani, Biotehnički fakultet, Odjel za znanost o drvu i drvnu tehnologiju, Ljubljana, Slovenija
Eugenia Mariana Tudor
; Salzburško sveučilište primijenjenih znanosti, Kuchl, Austrija i Tehničko sveučilište u Zvolenu, Zvolen, Republika Slovačka
Marius Catalin Barbu
; Salzburško sveučilište primijenjenih znanosti, Kuchl, Austrija i Transilvanijsko sveučilište u Brasovu, Fakultet za drvno inženjerstvo, Brasov, Rumunjska
Vladimir Jambreković
; Sveučilište u Zagrebu, Šumarski fakultet, Zagreb, Hrvatska
Nikola Španić
; Sveučilište u Zagrebu, Šumarski fakultet, Zagreb, Hrvatska
Sažetak
Increasing demand for wood resulted in competition between different branches of wood-based production. High intensity production, like the production of wood-based panels, is forced to look for other lignocellulosic resources. Bark is a possible source for wood-based panel industry, especially for particleboards. Bark chips were crushed into bark dust, which were used for the production of single-layer particleboards. The share of bark dust was 0 %, 0.5 %, 1 %, 5 % and 10 %. The boards were tested on thickness swelling (immersion in water, exposure to humid conditions) and internal bond. The highest internal bond was determined in the particleboard with 1 % bark share. Thickness swelling of boards with added bark was higher compared to boards without bark. The highest swelling was observed in boards with 10 % bark dust (immersion in water) or 5 % (humid conditions). Bark based boards absorbed less water.
Ključne riječi
bark dust; particleboard; thickness swelling; water absorption; internal bond
Hrčak ID:
221569
URI
Datum izdavanja:
28.6.2019.
Posjeta: 1.987 *