Tehnički vjesnik, Vol. 26 No. 5, 2019.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20190316040135
Research on Abrasive Belt Based Machining Technology for Milling Shaped Aero-Engine Blades
Lei Qiu
; Zhejiang University of Technology, Key Laboratory of E&M, Ministry of Education & Zhejiang Province, Hangzhou 310032, P. R. China
Xi Zeng
; Zhejiang University of Technology, Key Laboratory of E&M, Ministry of Education & Zhejiang Province, Hangzhou 310032, P. R. China
Shiming Ji
; Zhejiang University of Technology, Key Laboratory of E&M, Ministry of Education & Zhejiang Province, Hangzhou 310032, P. R. China
Dapeng Tan
; Key Laboratory of E&M, Ministry of Education & Zhejiang Province, Hangzhou 310032, P. R. China
Man Ge
; Key Laboratory of E&M, Ministry of Education & Zhejiang Province, Hangzhou 310032, P. R. China
Wenbin Qiu
; Key Laboratory of E&M, Ministry of Education & Zhejiang Province, Hangzhou 310032, P. R. China
Sažetak
This paper proposes an automatic surface treatment method for CNC milled blades. The surface texture characteristics of the blade after milling were analyzed. The contact area between the contact wheel and the blade surface was analyzed theoretically, and then the contact wheel and the blade edge were analyzed. The contact area between the intake side and the exhaust side was theoretically analyzed, and one micro-element in the contact area was selected, and the simulation analysis under multiple sets of parameters was carried out. In the experimental aspect, this paper has assembled a set of relatively reliable experimental systems, and carried out an in-depth analysis of a certain area of the engine blade obtained from the experiment to verify the feasibility and reliability of the proposed method.
Ključne riječi
abrasive belt; aero-engine blade; aviation manufacturing; removal model; surface processing
Hrčak ID:
226031
URI
Datum izdavanja:
8.10.2019.
Posjeta: 1.949 *