hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.5552/drvind.2020.1960

Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma

Jure Žigon   ORCID icon orcid.org/0000-0002-8326-0988 ; University of Ljubljana, Biotechnical Faculty, Department of Wood Science and Technology, Ljubljana, Slovenia
Sebastian Dahle   ORCID icon orcid.org/0000-0001-7568-0483 ; University of Ljubljana, Biotechnical Faculty, Department of Wood Science and Technology, Ljubljana, Slovenia
Marko Petrič   ORCID icon orcid.org/0000-0002-0283-7985 ; University of Ljubljana, Biotechnical Faculty, Department of Wood Science and Technology, Ljubljana, Slovenia
Matjaž Pavlič   ORCID icon orcid.org/0000-0002-0959-2060 ; University of Ljubljana, Biotechnical Faculty, Department of Wood Science and Technology, Ljubljana, Slovenia

Puni tekst: engleski, pdf (725 KB) str. 129-137 preuzimanja: 188* citiraj
APA 6th Edition
Žigon, J., Dahle, S., Petrič, M. i Pavlič, M. (2020). Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma. Drvna industrija, 71 (2), 129-137. https://doi.org/10.5552/drvind.2020.1960
MLA 8th Edition
Žigon, Jure, et al. "Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma." Drvna industrija, vol. 71, br. 2, 2020, str. 129-137. https://doi.org/10.5552/drvind.2020.1960. Citirano 18.05.2021.
Chicago 17th Edition
Žigon, Jure, Sebastian Dahle, Marko Petrič i Matjaž Pavlič. "Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma." Drvna industrija 71, br. 2 (2020): 129-137. https://doi.org/10.5552/drvind.2020.1960
Harvard
Žigon, J., et al. (2020). 'Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma', Drvna industrija, 71(2), str. 129-137. https://doi.org/10.5552/drvind.2020.1960
Vancouver
Žigon J, Dahle S, Petrič M, Pavlič M. Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma. Drvna industrija [Internet]. 2020 [pristupljeno 18.05.2021.];71(2):129-137. https://doi.org/10.5552/drvind.2020.1960
IEEE
J. Žigon, S. Dahle, M. Petrič i M. Pavlič, "Enhanced Abrasion Resistance of Coated Particleboard Pre-Treated with Atmospheric Plasma", Drvna industrija, vol.71, br. 2, str. 129-137, 2020. [Online]. https://doi.org/10.5552/drvind.2020.1960

Sažetak
This study aims to investigate the influence of atmospheric plasma treatment on the abrasion resistance of particleboards, as an example of a wood-based material, coated with a waterborne finish. The treatment of the substrate, prior to coating application, using a floating-electrode dielectric barrier discharge (FE-DBD) plasma, resulted in an enhanced abrasion resistance of the coated particleboards in comparison to the untreated ones during the abrasion test with a duration of 200 revolutions. This finding was related to lower contact angles of water and coating after treatment with plasma and greater hardness of the coating on the treated substrates. The micrographs of the sample cross sections recorded with scanning electron microscope showed differences in the amounts of remained coating on the abraded areas. Investigation with attenuated total reflection Fourier transform infrared spectroscopy revealed that treatment of the substrate with plasma did not affect the chemical composition nor the curing and structure of the later applied coating. Further studies should be performed to determine the resistance properties of such surface systems to other impacts.

Ključne riječi
particleboard; plasma; coating; abrasion

Hrčak ID: 238928

URI
https://hrcak.srce.hr/238928

[hrvatski]

Posjeta: 463 *