Skoči na glavni sadržaj

Textile & Leather Review, Vol. 3 No. 3, 2020.

Izvorni znanstveni članak

https://doi.org/10.31881/TLR.2020.12

Synthesis and Application of Graphene Oxide (GO) for Removal of Cationic Dyes from Tannery Effluents

Md. Israil Hossain orcid id orcid.org/0000-0001-8739-3035 ; Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-1209, Bangladesh
Amal Kanti Deb ; Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-1209, Bangladesh
Md. Zakir Sultan orcid id orcid.org/0000-0003-0816-0212 ; Centre for Advanced Research in Sciences (CARS), University of Dhaka, Dhaka-1000, Bangladesh
A. A. Shaikh ; Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-1209, Bangladesh
Manjushree Chowdhury orcid id orcid.org/0000-0001-8739-3035 ; Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-1209, Bangladesh
Md. Rayhan Sarker Sarker ; Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-1209, Bangladesh

Puni tekst: engleski pdf 3.052 Kb

str. 146-157

preuzimanja: 447

citiraj

Sažetak

The increasing demands for dye in tanning industries have resulted in unconstrained throwing away of dyes into water bodies causing enormous environmental pollution. The removal of these dyes from effluents is mandatory and needs the recommendation of the latest technology and less expensive processes in this regard. Graphene oxide (GO) was prepared, characterized, and applied in the process of removal of cationic dye. GO was characterized by FTIR, X-RD, SEM, and TGA and the following functional groups were found: –COOH, OH, -C=O, and C-O-C. Basic Blue 3 (BB 3) was used as a model synthetic cationic dye. The dye adsorption studies were carried out in terms of the adsorbent dose, the pH, initial dye concentrations, and contact time. The removal efficiency for BB 3 was found to be 100% dye concentration up to 600 ppm at pH 7 with 10 mg (0.1g/L) of the adsorbent, GO, within 6 minutes. In the case of real tannery effluents, the eradication efficiency was found to be 91.2%. The results revealed that GO was a suitable adsorbent for the removal of cationic dyes from tannery effluents.

Ključne riječi

Graphene oxide, adsorption, effluent, tannery, environment

Hrčak ID:

243656

URI

https://hrcak.srce.hr/243656

Datum izdavanja:

11.9.2020.

Posjeta: 1.453 *