Izvorni znanstveni članak

A Resistive Voltage Divider for Power Measurements

Martin Dadić orcid.org/0000-0001-7446-0024 ; University of Zagreb Faculty of Electrical Engineering and Computing Unska 3, 10 000 Zagreb, Croatia
Bruno Sandrić ; University of Zagreb Faculty of Electrical Engineering and Computing Unska 3, 10 000 Zagreb, Croatia
Petar Mostarac orcid.org/0000-0003-0854-3301 ; University of Zagreb Faculty of Electrical Engineering and Computing Unska 3, 10 000 Zagreb, Croatia
Roman Malarić ; University of Zagreb Faculty of Electrical Engineering and Computing Unska 3, 10 000 Zagreb, Croatia

Sažetak

The paper presents a resistive voltage divider (RVD), developed for power measurements at much higher frequencies than the traditional 50 Hz. The
design of the RVD and the methods of its evaluation are described. The RVD is intended to be used in a digital sampling wattmeter application based
on National Instruments PXI-4461 Dynamic Signal Analyzer. The design of the divider includes individual copper guards for each resistor, driven by
the auxiliary chain of resistors. To reduce the leakage currents, the PTFE terminals are applied between pins of the resistors and the printed circuit
board.

Ključne riječi

resistive voltage dividers; power measurement; PXI-4461; guarding

Hrčak ID:

247114

URI

https://hrcak.srce.hr/247114

Datum izdavanja:

15.1.2020.

Posjeta: 1.565 *