Izvorni znanstveni članak
https://doi.org/10.2478/otmcj-2020-0013
Symbiosis of life-cycle structural design and asset management based on Building Information Modeling: Application for industrial facility equipment
Lisa Lenz
; Faculty of Architecture and Civil Engineering, TU Dortmund University, Dortmund, Germany
Kai Christian Weist
; Faculty of Architecture and Civil Engineering, TU Dortmund University, Dortmund, Germany
Marvin Hoepfner
; Faculty of Architecture and Civil Engineering, TU Dortmund University, Dortmund, Germany
Panagiotis Spyridis
; Faculty of Architecture and Civil Engineering, TU Dortmund University, Dortmund, Germany
Mike Gralla
; Faculty of Architecture and Civil Engineering, TU Dortmund University, Dortmund, Germany
Sažetak
In the last few years, particular focus has been
devoted to the life cycle performance of fastening systems,
which is reflected in increasing numbers of publications,
standards and large-scale research efforts. Simultaneously,
experience shows that in many cases, where fastening
systems are implemented – such as industrial facilities –
the design of fasteners is governed by fatigue loading under
dynamic characteristics. In order to perform an adequate
design and to specify the most efficient and appropriate fastening product, the engineer needs to access and process a
broad range of technical and commercial information. Building information modelling (BIM), as a data management
method in the construction industry, can supply such information and accommodate a comprehensive design and specification process. Furthermore, the application of BIM-based
processes, such as the generation of a BIM-model, allows to
use the important information for the construction as well
as the life cycle management with different actions and time
dependencies of the asset and its components. As a consequence, the BIM model offers the potential to correlate different data relevant for achieving the goals of the respective
application, in order to ensure a more effective and correct
design of the fastening. This paper demonstrates such a BIMbased design framework for an Industry 4.0 case, and in
particular, the installation of a factory robot through post-installed anchors under fatigue-relevant loading in concrete.
Ključne riječi
building information modelling; fastening; systems; fatigue loading; Industry 4.0; lifecycle design
Hrčak ID:
247677
URI
Datum izdavanja:
1.2.2020.
Posjeta: 934 *