hrcak mascot   Srce   HID

Prethodno priopćenje
https://doi.org/10.17559/TV-20191205165340

Analysis of Outline Measurements Methods of Spur Gear Involute Profile

Piotr Boral* ; Czestochowa Univertsity of Technology, Ul. Dąbrowskiego 69, 42-201 Częstochowa, Poland
Rafal Gołębski ; Czestochowa Univertsity of Technology, Ul. Dąbrowskiego 69, 42-201 Częstochowa, Poland
Antun Stoić ; University of Slavonski Brod, Mechanical Engineering Faculty in Slavonski Brod, Trg Ivane Brlić Mažuranić 2, 35000 Slavonski Brod, Croatia

Puni tekst: engleski, pdf (2 MB) str. 1008-1011 preuzimanja: 71* citiraj
APA 6th Edition
Boral*, P., Gołębski, R. i Stoić, A. (2021). Analysis of Outline Measurements Methods of Spur Gear Involute Profile. Tehnički vjesnik, 28 (3), 1008-1011. https://doi.org/10.17559/TV-20191205165340
MLA 8th Edition
Boral*, Piotr, et al. "Analysis of Outline Measurements Methods of Spur Gear Involute Profile." Tehnički vjesnik, vol. 28, br. 3, 2021, str. 1008-1011. https://doi.org/10.17559/TV-20191205165340. Citirano 26.10.2021.
Chicago 17th Edition
Boral*, Piotr, Rafal Gołębski i Antun Stoić. "Analysis of Outline Measurements Methods of Spur Gear Involute Profile." Tehnički vjesnik 28, br. 3 (2021): 1008-1011. https://doi.org/10.17559/TV-20191205165340
Harvard
Boral*, P., Gołębski, R., i Stoić, A. (2021). 'Analysis of Outline Measurements Methods of Spur Gear Involute Profile', Tehnički vjesnik, 28(3), str. 1008-1011. https://doi.org/10.17559/TV-20191205165340
Vancouver
Boral* P, Gołębski R, Stoić A. Analysis of Outline Measurements Methods of Spur Gear Involute Profile. Tehnički vjesnik [Internet]. 2021 [pristupljeno 26.10.2021.];28(3):1008-1011. https://doi.org/10.17559/TV-20191205165340
IEEE
P. Boral*, R. Gołębski i A. Stoić, "Analysis of Outline Measurements Methods of Spur Gear Involute Profile", Tehnički vjesnik, vol.28, br. 3, str. 1008-1011, 2021. [Online]. https://doi.org/10.17559/TV-20191205165340

Sažetak
Comparsion of measuring methods for the involute profile of the spur gear tooth is described in this paper. The gear profile measurement results from the universal toolmakers microscope are compared with the results of use of Zeiss coordinate measuring machine with Gear Pro software and with the results of the theoretical calculation of the reference profile. The proposed measurements methods can be successfully used in quality management of unit production of gear drives.

Ključne riječi
involute profile; spur gear; universal toolmakers microscope

Hrčak ID: 258234

URI
https://hrcak.srce.hr/258234

Posjeta: 143 *