Skoči na glavni sadržaj

Prethodno priopćenje

Finite element method (FEM) simulation of processing of AISI-316 austenitic stainless steel by high-pressure torsion (HPT) process at the cryogenic cooling

A. Volokitin ; Rudny Industrial Institute, Rudny, Kazakhstan
I. Volokitina ; Rudny Industrial Institute, Rudny, Kazakhstan
E. Panin ; Karaganda Industrial University, Temirtau, Kazakhstan
A. Naizabekov ; Rudny Industrial Institute, Rudny, Kazakhstan
S. Aksenov ; National Research University Higher School of Economics, Moscow, Russia
D. Kuis ; Belarusian State Technological University, Minsk, Belarus


Puni tekst: engleski pdf 587 Kb

str. 237-240

preuzimanja: 237

citiraj


Sažetak

In this work the high-pressure torsion process of AISI-316 stainless steel in cryogenic conditions is studied by means of finite element simulation. The stress and strain distributions are analyzed and compared with the ones obtained for ambient temperature. It is shown that the cooling to cryogenic temperature do not affect the equivalent strain distribution significantly. At the same time, the stress values are significantly different - with cryogenic cooling, the level of compressive stresses increases by about 20 %. The simulation of microstructure evolution in Deform-3D program showed that the use of cryogenic cooling makes it possible to further grind the original structure.

Ključne riječi

stainless steel; severe plastic deformation; high-pressure torsion; stress-strain state; microstructure

Hrčak ID:

262431

URI

https://hrcak.srce.hr/262431

Datum izdavanja:

3.1.2022.

Posjeta: 621 *