Izvorni znanstveni članak

Influence of pass spacing on the spinning process of nickel-based alloy conical casing

L. Ding ; Ningbo University, School of Mechanical Engineering and Mechanics, Ningbo, China
X. S. Gao ; Ningbo University, School of Mechanical Engineering and Mechanics, Ningbo, China
X. X. Lu ; Ningbo University, School of Mechanical Engineering and Mechanics, Ningbo, China
B. S. Sun ; Ningbo University, School of Mechanical Engineering and Mechanics, Ningbo, China
X. D. Shu ; Ningbo University, School of Mechanical Engineering and Mechanics, Ningbo, China

Sažetak

High temperature nickel-based alloys are prone to forming defects due to serious work hardening, and the pass spacing is an important parameter in multi-pass drawing and spinning. Using GH4169 superalloy as the material, a Finite Element Model (FEM) was established based on the Simufact platform, and the influence of the pass spacing on the spinning process was explored by using the concave curve and circular arc trajectory. The results show that the stress-strain increases with the increase of the pass spacing. Obtain the optimal pass spacing under specific conditions: blank wall thickness t = 2,5 mm, blank diameter d = 250 mm, feed ratio f = 1,2 mm/rad, mandrel speed n = 300 r/min, pass spacing p = 14 mm.

Ključne riječi

nickel-based alloys; wheel track; FEM; stress-strain; pass spacing

Hrčak ID:

281387

URI

https://hrcak.srce.hr/281387

Datum izdavanja:

1.1.2023.

Posjeta: 404 *