Izvorni znanstveni članak
https://doi.org/10.32985/ijeces.13.8.9
Design of Sparse Uniform Linear Array Beamformer using Modified FRM Structure for Varied Applications
Parvathi Ammothum Kandy
; Department of Electronics and Communication Engineering, National Institute of Technology Calicut Kerala, India
Sakthivel Vellaisamy
; Faculty of Department of Electronics and Communication Engineering, National Institute of Technology Calicut, Kerala, India
Sažetak
This paper presents a method to generate antenna patterns for a Uniform Linear Array (ULA) having narrow beamwidth and low sidelobe levels (SLL) using the recently proposed Modified FRM (ModFRM) architecture. This allows it to direct the beams to specific ground cells for communications while mitigating inter-cell interference. The sharpness of the beam pattern defines the spatial discriminating performance of a ULA beamformer, while the SLL dictates the interference and noise suppression capabilities. Typically, a conventional ULA beamforming will demand high computational complexity and a large number of sensors to satisfy these requirements. Hence to reduce the system cost, using the ModFRM technique a sparse array is developed. With this strategy, the total number of sensors is drastically reduced compared to conventional ULA beamformers. The designed beamformers can be used in applications with stringent requirements where cost and size are concerned.
Ključne riječi
Spatial filtering; Beamformer; Uniform Linear Array; Frequency response masking; Spatial interpolation
Hrčak ID:
285435
URI
Datum izdavanja:
10.11.2022.
Posjeta: 644 *