Tehnički vjesnik, Vol. 30 No. 4, 2023.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20230426000572
Analysis of Power Losses in Constrained Cycloid Drive
Tihomir Mačkić
; University of Banja Luka, Faculty of Mechanical Engineering, Stepe Stepanović 71, 78000 Banja Luka, Bosnia and Herzegovina
Nenad Marjanović
; University of Kragujevac, Faculty of Engineering, 6, Sestre Janjic Str., 34000 Kragujevac, Serbia
Milan Tica
orcid.org/0000-0002-0754-6140
; University of Banja Luka, Faculty of Mechanical Engineering, Stepe Stepanović 71, 78000 Banja Luka, Bosnia and Herzegovina
Sanjin Troha
; University of Rijeka, Faculty of Engineering, Vukovarska 58, 51000 Rijeka, Croatia
Miroslav Milutinović
; University of East Sarajevo, Faculty of Mechanical Engineering, Vuka Karadžića 30, 71123 East Sarajevo, Bosnia and Herzegovina
Nebojša Rašović
; University of Mostar, Faculty of Mechanical Engineering, Computing and Electrical Engineering, Matice hrvatske b.b, 88000 Mostar, Bosnia and Herzegovina
Sažetak
The aim of this paper is to present a theoretical model for efficiency evaluation of a simple cycloid drive train with one degree of freedom (DOF) or constrained cycloid drive. In order to evaluate the efficiency, it is necessary to find the losses generated in the simple cycloid drive, where only losses depending on the load were considered. Expressions for determining speed ratios, efficiency, velocities and forces acting inside the cycloid drive are presented. These expressions are implemented in the theoretical model, where the places where the losses occur are defined. A computer program was created to facilitate analysis and obtain loss values based on different input data. Only load-dependent losses were considered in the theoretical model and computer program. In order to verify the theoretical model, experimental measurements were performed. A physical model of the simple cycloid drive train was created and analyzed on the test bench. The results for "S1" operating mode, i.e. when shaft 2 is stopped, show a mean value of the efficiency of 63.49%, for experimental measurements, while the mean value for theoretical analysis is 65.25%. For the operating mode "S2", i.e. with shaft 1 stopped, the mean value of the experimental measurements of the efficiency is 60.9%, while the theoretical mean value is 62.82%.
Ključne riječi
constrained cycloid drive; cycloid drive; efficiency; losses
Hrčak ID:
305454
URI
Datum izdavanja:
28.6.2023.
Posjeta: 974 *