Izvorni znanstveni članak

High temperature plastic deformation constitutive model of Mg-Zn-Zr-Y alloy

P. Huo ; College of Mechanical Engineering, North China University of Science and Technology, Hebei, Tangshan, China
F. L. Zhang ; College of Mechanical Engineering, North China University of Science and Technology, Hebei, Tangshan, China
X. Li ; College of Mechanical Engineering, North China University of Science and Technology, Hebei, Tangshan, China

Sažetak

In order to accurately predict the flow stress of Mg-Zn-Zr-Y alloy at high temperature, the hot compression test of Mg-Zn-Zr-Y alloy was carried out on Gleeble-1500 thermal / mechanical simulator. The deformation temperature was 523 K, 573 K, 623 K, and the strain rate was 0,01 ~ 1 s-1. By obtaining the true stress-strain curve, the strain compensation factor Z parameter was introduced into the Arrhenius equation to establish a more accurate strain coupling constitutive model. The results show that the theoretical value of the peak stress calculated by the constitutive model is in good agreement with the experimental results, and the average relative error is 5,67 %, which verifies the feasibility of the model.

Ključne riječi

Mg-Zn-Zr-Y alloy; thermal compression test; stress-stain curves; temperature; constitutive mode

Hrčak ID:

307420

URI

https://hrcak.srce.hr/307420

Datum izdavanja:

1.1.2024.

Posjeta: 690 *