Izvorni znanstveni članak

Deformation analysis before and after hoisting and reinforcement of large flue

C. D. Wu ; China MCC 22 Group Corporation Ltd.
D. L. Guo ; College of Mechanical Engineering, North China University of Science and Technology, Hebei, Tangshan, China
M. W. He ; China MCC 22 Group Corporation Ltd.
C. J. Wang ; China MCC 22 Group Corporation Ltd.
X. D. Meng ; China MCC 22 Group Corporation Ltd.
L. J. Zhang ; China MCC 22 Group Corporation Ltd.
K. Wang ; China MCC 22 Group Corporation Ltd.
H. C. Ji ; College of Mechanical Engineering, North China University of Science and Technology, Hebei, Tangshan, China *

* Dopisni autor.

Sažetak

In the process of carrying out the installation of large flue, because the thickness of the flue is thin, it is easy to deform when hoisting with wire rope, and too much deformation will affect the subsequent use of the flue, resulting in waste, so in order to reduce the deformation of the flue, the existing conditions are utilized, and the bracket is added inside the flue to play the role of support, and the deformation of the flue is reduced. Using 3D modeling and numerical simulation software, the flue structure before and after adding supports was modeled and numerically analyzed, and the two simulation results were compared, and the deformation of the flue after adding supports was analyzed to be relatively obvious under the action of hoisting.

Ključne riječi

Q235 steel; flue; numerical simulation; plastic deformation; stress-strain

Hrčak ID:

315695

URI

https://hrcak.srce.hr/315695

Datum izdavanja:

1.7.2024.

Posjeta: 637 *