Izvorni znanstveni članak
https://doi.org/10.15644/asc58/2/4
Thickness Variations of Thermoformed and 3D-Printed Clear Aligners
Ružica Bandić
; Katedra za ortodonciju Medicinskog fakulteta Sveučilišta u Splitu, Hrvatska
Katarina Vodanović
; Katedra za ortodonciju Medicinskog fakulteta Sveučilišta u Splitu, Hrvatska
Ivna Vuković Kekez
; Katedra za ortodonciju Medicinskog fakulteta Sveučilišta u Splitu, Hrvatska
Ivana Medvedec Mikić
; Katedra za endodonciju i restaurativnu dentalnu medicinu Medicinskog fakulteta Sveučilišta u Splitu, Hrvatska; Katedra za oralnu kirurgiju Medicinskog fakulteta Sveučilišta u Splitu, Hrvatska
Ivan Galić
; čilišta u Splitu, Hrvatska; Zavod za maksilofacijalnu kirurgiju KBC-a Split, Hrvatska
Danijela Kalibović Govorko
orcid.org/0000-0002-2598-9009
; Katedra za ortodonciju Medicinskog fakulteta Sveučilišta u Splitu, Hrvatska; Zavod za maksilofacijalnu kirurgiju KBC-a Split, Hrvatska
Sažetak
Objective: To assess thickness variations of thermoformed and 3D-printed clear aligners. Materials and Methods: Six different thermoplastic materials with different initial thicknesses were used for aligner thermoforming using Biostar® device (Biostar®, SCHEU-DENTAL GmbH, Iserlohn, Germany). Also, two different dental resins were used to create the printed aligners in three digitally designed thicknesses using IZZI Direct printer (3Dtech, Zagreb, Croatia). The aligners were measured using an electronic micrometer (ELECTRONIC UNIVERSAL MICROMETER, Schut Geometrical Metrology, Groningen, The Netherlands, accuracy: 0.001 mm) on a total of 20 points per aligner. Statistical analysis was performed using the JASP program (JASP, University of Amsterdam, Amsterdam, The Netherlands). Results: The difference between the thermoformed and printed groups was statistically significant. Significant differences between different thermoformed materials and between 3D-printed materials were found. The thickness of thermoformed aligners deviated more in the upper jaw, whereas the thickness of printed aligners deviated more in the lower jaw. Both differences were statistically significant. The greatest average deviation from the initial thickness was found in Duran 0.75; Erkodur 0.6; Erkoloc-Pro 1.0; IZZI 0.5; NextDent 0.6 and NextDent A 0.6. NextDent group had the lowest deviations for all teeth of both jaws, except for upper and lower first molar where NextDent A group was more accurate. Conclusions: Thermoformed aligners showed decreased values, while printed ones showed mostly increased values compared to the original material thickness. The highest mean deviation belonged to IZZI group, and the NextDent group had the lowest mean deviation. The thickness of both aligners was lower at the edges compared to the thickness at cusps and fissures.
Ključne riječi
Orthodontic Appliances Removable; Three-Dimensional Printing; Synthetic Resins; Orthodontics; Printing; Three-dimensional; Orthodontic Appliances; Removable
Hrčak ID:
318093
URI
Datum izdavanja:
22.6.2024.
Posjeta: 89 *