Metalurgija, Vol. 48 No. 2, 2009.
Izvorni znanstveni članak
Fracture mechanics parameters estimation of CCT specimens made of X 5 CrNi 18 10 steel
D. Kozak
; Faculty of Mechanical Engineering, University of Osijek, Slavonski Brod, Croatia
I. Samardžić
; Faculty of Mechanical Engineering, University of Osijek, Slavonski Brod, Croatia
P. Konjatić
; Faculty of Mechanical Engineering, University of Osijek, Slavonski Brod, Croatia
Sažetak
This study investigates fracture behaviour of specimens made of high ductile stainless steel. Investigated material was X 5 CrNi 18 10 steel and the specimens used in this investigation were prepared as centre crack tension (CCT) specimens. Pre-cracking of specimens was done by controlled cycling loading. For determination of J-integral, as one of important fracture mechanics parameters, a single specimen method with loading-unloading procedure was used. The same experiment was numerically modelled by using commercial software for finite element analysis – ANSYS. The standard node releasing technique was implemented in finite element method simulation to simulate crack propagation. Numerically obtained results were compared to the results obtained by experiment.
Ključne riječi
ductile stainless steel; fracture mechanics parameters; CCT specimen; finite element method
Hrčak ID:
31991
URI
Datum izdavanja:
1.4.2009.
Posjeta: 2.505 *