Izvorni znanstveni članak
https://doi.org/https://doi.org/10.5552/crojfe.2024.2289
Variability of Morpho-Anatomical Characteristics of Different Willow Clones Contaminated with Heavy Metals
Dušan Jokanović
; Department of Forestry and Nature Protection University of Belgrade Faculty of Forestry Kneza Višeslava 1 11030 Belgrade SERBIA
Jelena Urošević
; Public Enterprise »EPS« Department for biomass Bogoljuba Uroševića Crnog 44 11 500 Obrenovac SERBIA
Srđan Stojnić
; Institute for Lowland Forestry and Environment Antona Čehova 13d 21102 Novi Sad SERBIA
Vesna Nikolić Jokanović
; Department of ecological engineering for soil and water resources protection University of Belgrade Faculty of Forestry Kneza Višeslava 1 11030 Belgrade SERBIA
Dragica Stanković
; University of Belgrade Institute for Multidisciplinary Research Department of Plant-Soil and Nano Systems Kneza Višeslava 1 11030 Belgrade SERBIA
Iva Ištok
; University of Zagreb Faculty of Forestry and Wood Technology Institute of wood science Svetošimunska cesta 23 10000 Zagreb CROATIA
Sažetak
In this paper, the variability of morphological (stem height, stem basal diameter, proportion of pith, wood and bark) and wood anatomical characteristics (fiber length, fiber diameter, fiber lumen diamater, double cell-wall thickness, vessel diameter, wood rays width and height) of three Salix alba clones (B-44, 347 and NS 73/6) and one Salix viminalis clone both in the control plot and in the site contaminated with a mixture of heavy metals (As, Cd, Cr, Cu, Ni, Pb) was investigated. The observed results showed that individuals of all four clones had significantly higher average values of stem height and stem basal diameter at the control plot compared to the polluted site. As for the proportion of pith, bark and wood, heavy metals caused an increase in the share of pith and a decrease in the share of bark and wood in all clones with the exception of clone NS 73/6. The analysis of wood fiber dimensions showed that the values of all parameters were higher at the control site with the exception of fiber lumen diameter where higher values were observed for clones B-44 and NS 73/6 at the polluted site. Higher values of vessel diameter were recorded for all clones at the control plot, while wood rays width of all individuals was greater at the contaminated site. Regarding the wood rays height, only Salix viminalis showed higher value at the polluted site. These results confirmed that pollution-induced heavy metal stress significantly altered the morphological and wood anatomical characteristics of all researched clones and that it may affect their utility properties.
Ključne riječi
Salix clones, polluted site, control site, morpho-anatomical characteristics
Hrčak ID:
322760
URI
Datum izdavanja:
15.7.2024.
Posjeta: 0 *