Izvorni znanstveni članak

Heat transfer analyses of continuous casting by free jet meltspinning device

B. Karpe ; Faculty of Natural Science and Engineering, University of Ljubljana, Slovenia
B. Kosec ; Faculty of Natural Science and Engineering, University of Ljubljana, Slovenia
T. Kolenko ; Faculty of Natural Science and Engineering, University of Ljubljana, Slovenia
M. Bizjak ; Faculty of Natural Science and Engineering, University of Ljubljana, Slovenia

Sažetak

New method for determining contact resistance through variable heat transfer coefficient is introduced which takes into account physical properties of the casting material, process parameters and contact time/length between molten material (melt puddle) and chilling wheel and enables cooling rate prediction before experiment execution. From the results can be concluded, that those process parameters which determine the thickness of the melt puddle in the downstream and consequently the ribbon thickness have major influence on cooling rate of the ribbon. In the case of continuous casting, heat balance of the wheel is calculated and influence of the chill wheel cooling mode on cooling rate of metallic ribbon is analyzed.

Ključne riječi

continuous casting; rapid solidification; metallic materials; heat transfer balance; heat transfer coefficient; numerical modeling

Hrčak ID:

60846

URI

https://hrcak.srce.hr/60846

Datum izdavanja:

3.1.2011.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.982 *