hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.5562/cca1743

Electrodeposition of Nickel onto 12K Carbon Fibre Tow in a Continuous Manner

Boguslaw Pierozynski ; Department of Chemistry, Faculty of Environmental Management and Agriculture, University of Warmia and Mazury in Olsztyn, Plac Lodzki 4, 10-957 Olsztyn, Poland

Puni tekst: engleski, pdf (2 MB) str. 1-8 preuzimanja: 3.016* citiraj
APA 6th Edition
Pierozynski, B. (2012). Electrodeposition of Nickel onto 12K Carbon Fibre Tow in a Continuous Manner. Croatica Chemica Acta, 85 (1), 1-8. https://doi.org/10.5562/cca1743
MLA 8th Edition
Pierozynski, Boguslaw. "Electrodeposition of Nickel onto 12K Carbon Fibre Tow in a Continuous Manner." Croatica Chemica Acta, vol. 85, br. 1, 2012, str. 1-8. https://doi.org/10.5562/cca1743. Citirano 12.04.2021.
Chicago 17th Edition
Pierozynski, Boguslaw. "Electrodeposition of Nickel onto 12K Carbon Fibre Tow in a Continuous Manner." Croatica Chemica Acta 85, br. 1 (2012): 1-8. https://doi.org/10.5562/cca1743
Harvard
Pierozynski, B. (2012). 'Electrodeposition of Nickel onto 12K Carbon Fibre Tow in a Continuous Manner', Croatica Chemica Acta, 85(1), str. 1-8. https://doi.org/10.5562/cca1743
Vancouver
Pierozynski B. Electrodeposition of Nickel onto 12K Carbon Fibre Tow in a Continuous Manner. Croatica Chemica Acta [Internet]. 2012 [pristupljeno 12.04.2021.];85(1):1-8. https://doi.org/10.5562/cca1743
IEEE
B. Pierozynski, "Electrodeposition of Nickel onto 12K Carbon Fibre Tow in a Continuous Manner", Croatica Chemica Acta, vol.85, br. 1, str. 1-8, 2012. [Online]. https://doi.org/10.5562/cca1743

Sažetak
Nickel-coated carbon fibre (NiCCF) is an important composite material, which finds nu- merous engineering applications, primarily within: computer, telecommunication, automotive and military industries. In general, NiCCF can be produced by one of the three methods, namely: chemical vapour deposition (CVD), electroless, and electrochemical (galvanic) deposition of Ni on a carbon fibre tow material. The present paper reports a study of the process of nickel electrodeposition (at ultrathin layers of ≈ 0.3–0.5 μm) onto the surface of 12K (12000 single filaments) carbon fibre (CF) tow, carried-out in a continuous way. In addition, the effect of selected pre-treatments applied to carbon fibre, as well as that of operational parameters of the process, on the quality of the NiCCF product were investigated. (doi: 10.5562/cca1743)

Ključne riječi
nickel-coated carbon fibre; NiCCF; nickel electrodeposition; CF pre-treatments

Hrčak ID: 80392

URI
https://hrcak.srce.hr/80392

Posjeta: 3.362 *