Tehnički vjesnik, Vol. 19 No. 2, 2012.
Izvorni znanstveni članak
Influence of cutting parameters on thrust force, drilling torque and delamination during drilling of carbon fibre reinforced composites
Nikša Koboević
; University of Dubrovnik, Ćira Carića 4, 20000 Dubrovnik, Croatia
Mate Jurjević
; University of Dubrovnik, Ćira Carića 4, 20000 Dubrovnik, Croatia
Žarko Koboević
orcid.org/0000-0002-2884-5932
; University of Dubrovnik, Ćira Carića 4, 20000 Dubrovnik, Croatia
Sažetak
Composite materials have become valuable construction materials in aerospace, defense and in recent years in automotive industry. The advantage of composite materials over conventional materials stems largely from their higher specific strength, stiffness and fatigue characteristics. Composite components are joined by mechanical fasteners, accurate, precise high quality holes need to be drilled to ensure proper and durable assemblies. Drilling of composite materials causes several damages, such us: delamination, fibre-pull out, edge chipping, uncut fibers and others. Delamination is a major problem associated with drilling fiber reinforced composite materials. It causes poor assembly tolerance, reduces structural integrity of material and the potential for long term performance deterioration. The thrust force has been cited as main cause of delamination. In this paper the objective was to establish correlation between cutting parameters and thrust force, drilling torque and delamination. Drilling tests were carried out on carbon epoxy composite material using three different drills, HSS-Co twist drill, Multi Constructional twist drill and "Brad & Spur" drill. The data have been processed by the "DesignExpert" software package which generated the mathematical models.
Ključne riječi
carbon fibre reinforced composite material; delamination; drilling; hole quality
Hrčak ID:
83921
URI
Datum izdavanja:
29.6.2012.
Posjeta: 6.032 *