Skoči na glavni sadržaj

Pregledni rad

A simple method to estimate the maximum liquid production rate using plunger lift system in wells

Alireza Bahadori ; Southern Cross University, School of Environment, Science and Engineering, Lismore, NSW, 2480, Australia
Gholamreza Zahedi ; Process Systems Engineering Centre (PROSPECT), Faculty of Chemical and Natural Resources Engineering, UniversitiTeknologi Malaysia, UTM Johor, Malaysia
Sohrab Zendehboudi ; Department of Chemical Engineering, University of Waterloo, Waterloo, Ontario, Canada
Ahmad Jamili ; Mewbourne School of Petroleum and Geological Engineering, the University of Oklahoma, Norman, OK USA


Puni tekst: hrvatski pdf 77 Kb

str. 370-372

preuzimanja: 506

citiraj

Puni tekst: engleski pdf 615 Kb

str. 365-369

preuzimanja: 1.816

citiraj


Sažetak

Plunger Lift is a cyclic method of artificial lift that uses a plunger to establish an interface between the liquid accumulated in the production tubing and the reservoir or annulus gas pressure that will be used to lift the fluid in wells. In this work, the maximum possible liquid production rate that plunger lift will tolerate for a given depth and tubing size has been placed on a quantitative basis by means of simple equations obtained from correlations of field data. The predictive tool developed in this study can be of immense practical value for petroleum engineers to have a quick check on the maximum possible liquid production rate that plunger lift will tolerate for a given well depth and tubing size at various wells without opting for any expensive field trials. In particular, petroleum and production engineers would find the proposed method to be user-friendly with transparent calculations involving no complex expressions.

Ključne riječi

plunger lift; artificial lift; tubing size; oil production; Vandermonde matrix; predictive tool

Hrčak ID:

95414

URI

https://hrcak.srce.hr/95414

Datum izdavanja:

31.12.2012.

Podaci na drugim jezicima: hrvatski

Posjeta: 2.935 *