Izvorni znanstveni članak

Integrated procedure for flatness measurements of technical surfaces

Biserka Runje orcid.org/0000-0002-7786-0864 ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lučića 5, 10000 Zagreb, Croatia
Marijan Marković ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lučića 5, 10000 Zagreb, Croatia
Dragutin Lisjak orcid.org/0000-0002-9976-577X ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lučića 5, 10000 Zagreb, Croatia
Srđan Medić orcid.org/0009-0004-2255-0190 ; Karlovac University of Applied Sciences, Trg J. J. Strossmayera 9, 47000 Karlovac, Croatia
Živko Kondić ; Varaždin University of Applied Sciences, J. Križanića 36, 42000 Varaždin, Croatia

Sažetak

In accordance with the applicable standards, this paper describes the demands for flatness of measurement tables. The paper has elaborated methods of measurement and a more detailed method of measuring flatness deviation with the use of an electronic level. Mathematical model has been described and an integrated computer model for processing, axonometric and topographic representation of the results of measuring deviations from flatness in the process of measuring with electronic level has been developed. The established mathematical model and developed software solution have been experimentally validated.

Ključne riječi

deviation from flatness; electronic level; integrated computer model

Hrčak ID:

97487

URI

https://hrcak.srce.hr/97487

Datum izdavanja:

22.2.2013.

Podaci na drugim jezicima: hrvatski

Posjeta: 3.584 *