Izvorni znanstveni članak
THE IMPACT OF STRUCTURAL CHARACTERISTICS AND WORKING SPEED OF PEA HARVESTER ON THE QUALITY OF WORK
Vlado Kušec
; Visoko gospodarsko učilište Križevci, Križevci, Hrvatska
Darko Novotni
; Srednja gospodarska škola Križevci, Križevci, Hrvatska
Miomir Stojanović
orcid.org/0000-0002-1577-5189
; Visoko gospodarsko učilište Križevci, Križevci, Hrvatska
Kruno Kamenjak
; Visoko gospodarsko učilište Križevci, Križevci, Hrvatska
Sažetak
A research on the influence of working speed and structural characteristics of pea harvester threshing device on the quality of work in harvesting green peas was done on the production area of 75 ha in the production conditions of north-western Croatia. Two pea harvesters were investigated, FMC-879 and BIG DRUM 906, varying in pea pod threshing device. These devices were studied at various operating speeds of pea harvester (2.0, 3.0 and 4.0 km/h) and two different ripening stages of pea (110 and 140 0 TV). Losses and grain damage were monitored separately for each harvester. Harvester losses were systematized as harvesting device losses, threshing device losses and total losses. Research findings clearly show that the largest losses for both types of pea harvester at all three speeds are harvesting device losses in the category grain in ripped pea pods, from 3.16 to 7.18 %.
Based on the survey results, it is evident that the greater the speed of pea harvester, the higher plant mass flow through the threshing device, which results in less visible and invisible grain damage, while the losses and impurities are increased.
Ključne riječi
pea harvester; structural characteristics; working speed; quality of work
Hrčak ID:
101588
URI
Datum izdavanja:
24.4.2013.
Posjeta: 2.244 *