Prethodno priopćenje

The effect of crystallization conditions on tantalum distribution in molybdenum and tungsten during electron beam zone melting

J. K. Skotnicova ; VŠB – Technical University of Ostrava, Faculty of Metallurgy and Material Engineering, Ostrava – Poruba, Czech Republic
J. Drapala ; VŠB – Technical University of Ostrava, Faculty of Metallurgy and Material Engineering, Ostrava – Poruba, Czech Republic
M. Madaj ; VŠB – Technical University of Ostrava, Faculty of Metallurgy and Material Engineering, Ostrava – Poruba, Czech Republic
V. M. Kirillova ; Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow, Russian Federation

Sažetak

The distribution of tantalum in molybdenum and tungsten single crystals during electron beam floating zone melting under different crystallization conditions was investigated. The performed line chemical analysis of specimens proved creation of tantalum micro segregation, so-called growth striations, which showed themselves on concentration profiles as periodically alternating areas with increased and decreased concentrations of tantalum. The existence of these chemical inhomogeneities suggests that stationary conditions of the crystal growth were disturbed during the zone melting, i.e. fluctuations of microscopic rate of growth occurred due to convection in the melt. The determined effective distribution coefficients of tantalum in molybdenum and tungsten approach to calculated theoretical values of the equilibrium distribution coefficient.

Ključne riječi

zone melting; tantalum; molybdenum; tungsten; inhomogeneities

Hrčak ID:

110072

URI

https://hrcak.srce.hr/110072

Datum izdavanja:

1.4.2014.

Posjeta: 1.407 *