Skoči na glavni sadržaj

Metalurgija , Vol. 53 No. 2, 2014.

  • Datum izdavanja: 01.04.2014.
  • Objavljen na Hrčku: 11.11.2013.

Sadržaj

Puni tekst

Finite volume modeling of the solidification of an axial steel cast impeller (str. 149-154)

M. Copur, M. N. Eruslu
Izvorni znanstveni članak


Utilization of casting ladle lining enthalpy for heating gas savings in the course of ladle preheating (str. 159-162)

D. Jančar, M. Klarova, P. Tvardek, J. Vlček, P. Hašek, F. Ovčačik
Izvorni znanstveni članak


Hydrogen embrittlement of duplex steel tested using slow strain rate test (str. 163-166)

P. Vaňova, J. Sojka
Izvorni znanstveni članak


Influence of the impurities on the depth of penetration with carbon steel weldings (str. 167-170)

O. Savytsky, M. Savytsky, D. Bajić, Y. Shkrabalyur
Izvorni znanstveni članak


Effect of nonmetallic inclusions on steel welds metal hot cracking (str. 171-174)

B. Zorc, M. Imamović, A. Nagode, A. Stoić, B. Kosec, I. Samardžić, L. Kosec
Izvorni znanstveni članak


Evaluation of creep properties of steel P92 and its welded joint (str. 175-178)

P. Mohyla, Z. Kubon, R. Cep, I. Samardzic
Izvorni znanstveni članak


Removal of fluoride from fluoride-bering cerium sulfate solution by hydrous zirconium oxide (str. 183-185)

J. G. He, Y. Li, X. X. Xue, H. Q. Ru, X. W. Huang, H. Yang
Izlaganje sa skupa


Influence of heat treatment on properties of ti-nb alloys (str. 186-188)

L. Kunčicka, P. Štěpan, J. Kliber, I. Mamuzić
Izvorni znanstveni članak


The analysis of particles emission during the process of grinding of steel EN 90MNV8 (str. 189-192)

M. Ilić, I. Budak, B. Kosec, A. Nagode, J. Hodolič
Izvorni znanstveni članak


The computer support of diagnostics of circle crystallizers (str. 193-196)

J. David, P. Švec, R. Frischer, R. Garzinova
Prethodno priopćenje


Processes at the inetrface molten metal-sand mold (str. 197-200)

Z. Janjušević, Z. Gulišija, M. Mihailović, A. Patarić
Prethodno priopćenje


Physical modelling of removing hydrogen from liquid aluminium conducted in URC-7000 reactor (str. 205-208)

M. Saternus, T. Merder, J. Pieprzyca
Prethodno priopćenje


The effect of crystallization conditions on tantalum distribution in molybdenum and tungsten during electron beam zone melting (str. 209-211)

J. K. Skotnicova, J. Drapala, M. Madaj, V. M. Kirillova
Prethodno priopćenje


The role of a gas phase in the evaporation process of volatile components of the metal bath (str. 215-217)

J. Łabaj, G. Siwiec, L. Blacha, R. Burdzik
Prethodno priopćenje


Study of process parameters on aluminium foam formation in the Al-6Si-3Mg alloy (str. 218-220)

J. Juarez-Hernandez, R. Benavides-Trevino, O. Barceinas-Sanchez, M. Hernandez-Rodriguez, R. Almaguer
Prethodno priopćenje


The effects of temperature on the kinetics of aluminium evaporation from the Ti-6Al-4V alloy (str. 225-227)

G. Siwiec, J. Mizera, D. Jama, A. Szmal, R. Burdzik
Prethodno priopćenje


Extraction of copper from solution after bioleaching of printed circuit boards (PCBs) (str. 228-230)

J. Willner, A. Fornalczyk
Prethodno priopćenje


Studying phase structure of burned ferrous manganese ores by method of nuclear gamma-resonance spectroscopy (str. 231-234)

B. Shayakhmetov, A. Issagulov, A. Baisanov, G. Karakeyeva, D. Issagulovа
Prethodno priopćenje


Comparison of heat effects associated with metal cutting method on ST 37 alloy steel (str. 235-238)

L. Dahil, İ. Dahil
Prethodno priopćenje


The influence of mixing water and abrasives on the quality of machined surface (str. 239-242)

A. Stoić, M. Duspara, B. Kosec, M. Stoić, I. Samardžić
Prethodno priopćenje


Suitability of heat treatment for crack resistance of material in the connection part of heavy transporter for liquid slag (str. 243-246)

T. Vuherer, M. Zrilić, Lj. Milović, I. Samardžić, V. Gliha
Prethodno priopćenje


Model of efficiency improvement in purchasing strategic raw material in a metallurgical company (str. 247-250)

A. Csikosova, M. Antošova, R. Weiss
Prethodno priopćenje


Finite element type of stress analysis for parts based on S235 JR steel welding (str. 251-253)

C. Babis, O. Chivu, D. Dobrotă
Prethodno priopćenje


Impact of climate changes on the european industry (str. 254-256)

K. Sienkiewicz-Małyjurek
Pregledni rad


Model of truly closed circuit of waste stream flow in metallurgical enterprise (str. 257-260)

B. Gajdzik, E. Michlowicz, B. Zwolińska, P. Kisiel
Pregledni rad


Elaborating a global diagnosis of a company in metallurgy industry (str. 261-264)

M.V. Achim, S.N. Borlea
Pregledni rad


Effective recruitment method for the marketing department of a metallurgical enterprise (str. 273-275)

E. Jaba, A. Morosanu, D. Şerban, M. Gruiescu
Pregledni rad


Risk management in the planning of development projects in the industrial enterprises (str. 276-278)

J. Bijańska, K. Wodarski
Pregledni rad


Assessing bankruptcy risk for Romanian metallurgical companies (str. 279-282)

S.N. Borlea, M.V. Achim
Pregledni rad


Innovation of costing system in metallurgical companies (str. 283-285)

J. Kutač, K. Janovska, A. Samolejova, P. Besta
Stručni rad


Use of technical analysis indicators at trading shares of steel companies (str. 286-288)

J. Zuzik, R. Weiss, M. Antošova
Stručni rad


Posjeta: 68.981 *