Građevinar, Vol. 65 No. 10., 2013.
Izvorni znanstveni članak
https://doi.org/10.14256/JCE.905.2013
Truss girder joint with a large diameter mechanical fastener
Krunoslav Pavković
Miljenko Haiman
Mladen Meštrović
Vlatka Rajčić
Sažetak
A joint with a large diameter fastener for connecting large span truss girder nodes is presented in the paper. The joint strength and slip modulus were analysed by means of experimental testing and the finite element method. The experimental testing was conducted on four truss girders with the proposed joint. The nonlinear truss girder model analysis, was conducted using the Abaqus/CAE software with the UMAT subroutine. The results obtained and analysed according to EN 21512, show that the proposed joint has a large strength and slip modulus, and that it can be used for large-span truss girders. The results also show that the equation for embedding compression strength according to EC5 should be modified.
Ključne riječi
truss girder joint; non-linear analysis; large diameter fastener; glued-in rods; UMAT subroutine
Hrčak ID:
110119
URI
Datum izdavanja:
6.11.2013.
Posjeta: 3.161 *