Drvna industrija, Vol. 66 No. 2, 2015.
Izvorni znanstveni članak
https://doi.org/10.5552/drind.2015.1359
Pyrolysis of Firwood (Abies bornmülleriana Mattf.) Sawdust: Characterization of Bio-Oil and Bio-Char
Günay Özbay
; Sveučilište u Karabuku, Šumarski fakultet, Odjel za inženjerstvo šumskih proizvoda, Karabuk, Turska
Sažetak
This paper describes the research of slow pyrolysis of firwood (Abies bornmülleriana Mattf.) sawdust by using fixed-bed reactor. The effect of temperature ranging between 350 and 600 °C on gas, liquid and solid products was examined. The maximum bio-oil yield of 45.9 % was obtained at the final pyrolysis temperature of 500 °C. The elemental analysis and heating value of bio-oil and bio-char were determined, and then the chemical composition of the bio-oil was investigated using chromatographic and spectroscopic techniques such as Gas Chromatography–Mass Spectrometry (GC/MS) and Proton Nuclear Magnetic Resonance (1H-NMR). The liquid product was mainly composed of phenolics, including 2-methoxy-phenol, 2-methyl-phenol, phenol, as well as aldeyhdes, acids, esters, alcohols and ketones. The chemical characterization has shown that the bio-oil obtained from residues of forestry production, such as firwood sawdust, can be used as an environmental feedstock, which is an ideal candidate for alternative fuels. Moreover the bio-char can be used as an energy source and active carbon.
Ključne riječi
Bio-oil; Fir wood; GC/MS; 1H-NMR; Pyrolysis
Hrčak ID:
140743
URI
Datum izdavanja:
6.7.2015.
Posjeta: 3.308 *