Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.5552/drind.2017.1633

Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results

Fabian Wulf ; Sveučilište za održivi razvoj u Eberswaldeu, Sveučilište primijenjenih znanosti, Fakultet za znanost i tehnologiju drva, Eberswalde, Njemačka
Moritz Sanne ; Sveučilište za održivi razvoj u Eberswaldeu, Sveučilište primijenjenih znanosti, Fakultet za znanost i tehnologiju drva, Eberswalde, Njemačka
Alexander Pfriem orcid id orcid.org/0000-0001-6999-6182 ; Sveučilište za održivi razvoj u Eberswaldeu, Sveučilište primijenjenih znanosti, Fakultet za znanost i tehnologiju drva, Eberswalde, Njemačka


Puni tekst: engleski pdf 581 Kb

str. 281-289

preuzimanja: 766

citiraj


Sažetak

Seven different coating systems were tested regarding their suitability for application on bicycle frames made of wood. Since bicycles are ridden throughout the year, the coating system has to withstand different outdoor climate conditions and, especially in winter, the salt brines from the roads. For this reason, an artificial weathering test with an additional freezing step was performed, followed by a specially developed salt brine spray test in ambient outdoor winter climate. Another focus was on the applicability of the coatings. For the tests, a range of coatings, originally developed for wooden front doors, floors and for boat building, was selected. These coatings were expected to meet the main requirements for UV radiation - permanence, weather resistance and saltwater firmness. The main constituents of the coatings were water-based polymer dispersions, two-component polyurethane systems or synthetic and natural oils. The layer thicknesses of the coatings, as well as colour and gloss data of the specimens, were recorded and rated. The adhesion capability was examined by carrying out a cross-cut-test. Surface damages were observed visually. It turned out that colour and gloss change served as good indicators for the decay of the coating. Three different coatings passed the accelerated weathering test. Salt spray had no significant effect on any of the coatings.

Ključne riječi

wooden bicycle; wood coating; durability; artificial weathering; salt spray

Hrčak ID:

191938

URI

https://hrcak.srce.hr/191938

Datum izdavanja:

3.1.2018.

Podaci na drugim jezicima: hrvatski

Posjeta: 2.237 *