Tehnički vjesnik, Vol. 25 No. 1, 2018.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20160224141159
Mechanical Properties Testing of P92 Welded Joints Prepared by Manual Metal Arc Welding
Petr Mohyla
orcid.org/0000-0002-5459-8808
; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Mechanical Technology, 17. listopadu 15, 708 33 Ostrava, Czech Republic
Lukáš Havelka
; Flash Steel Power, a.s., Martinovská 3168/48, 723 00 Ostrava – Martinov, Czech Republic
Karel Kouřil
; Brno University of Technology, Faculty of Mechanical Engineering, Institute of Manufacturing Technology, Technická 2896/2, 616 69 Brno, Czech Republic
Sažetak
This article deals with the new results from measurement of mechanical properties of P92 welded joints. Tested welded joints of P92 steel were prepared using Gas Tungsten Arc Welding (GTAW) for root layer in combination with Manual Metal Arc Welding (MMAW) for filler layers. After the welding, the different modes of Post Weld Heat Treatment (PWHT) were made and the values of hardness, tensile strength and impact toughness of weld metal and Heat-Affected Zone (HAZ) were measured.
Ključne riječi
Gas Tungsten Arc Welding; hardness; impact energy; Manual Metal Arc Welding; tensile strength; welding
Hrčak ID:
193594
URI
Datum izdavanja:
10.2.2018.
Posjeta: 2.661 *