Tehnički vjesnik, Vol. 26 No. 4, 2019.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20170924230143
Accuracy Control in the Process of Low-Rigidity Elastic Deformable Shafts Turning
Antoni Świć
; Lublin University of Technology, Faculty of Mechanical Engineering, Institute of Technological Systems of Information, Ul. Nadbystrzycka 36, 20-618 Lublin, Poland
Dariusz Wołos
; Lublin University of Technology, Faculty of Mechanical Engineering, Institute of Technological Systems of Information, Ul. Nadbystrzycka 36, 20-618 Lublin, Poland
Arkadiusz Gola
; Lublin University of Technology, Faculty of Mechanical Engineering, Institute of Technological Systems of Information, Ul. Nadbystrzycka 36, 20-618 Lublin, Poland
Natalia Smidova
; Technical University of Kosice, Faculty of Electrical Engineering of Information, Department of Physics, Park Angelinum 9, 040 01 Kosice, Slovakia
Sažetak
The paper focuses on the problem of control of accuracy of forming elastic-deformable shafts with low rigidity. In particular, results of analysis of basic factors affecting the accuracy of machining of low-rigidity shafts such as the stiffness of the technological system, geometry of cutting tool, lathe temperature, degree of cutting tool wear, cutting tool strength, lubrication-cooling fluid and machining parameters are presented. Moreover, the performed analysis encompassed the effect of stiffness of particular elements of the technological system, the analytical relations determining the changes of defined parameters, values of elasticity of the fixed headstock and tailstock, as well as of the stiffness of the machining system from the zones of rigidity of the parts. To analyse appearing errors in the real industrial conditions, the study was realized on the example of manufacturing precision mechanics tooling in two and a single pass, with the application of specific parameters of machining.
Ključne riječi
accuracy; control; flexible workpiece; low rigidity; machining; manufacturing; stiffness; turning
Hrčak ID:
223280
URI
Datum izdavanja:
25.7.2019.
Posjeta: 1.780 *