Skoči na glavni sadržaj

Tehnički vjesnik , Vol. 26 No. 4, 2019.

  • Datum izdavanja: 25.07.2019.
  • Objavljen na Hrčku: 25.07.2019.

Sadržaj

Puni tekst

Arranging Bus Behaviour by Finding the Best Prediction Model with Artificial Neural Networks (str. 885-892)

Emrah Aydemir, Sevinc Gulsecen
Izvorni znanstveni članak


Cycloid Approximation with Circle for the Calculation of Exit Angle (str. 893-901)

György Póka, István Németh
Izvorni znanstveni članak


Concept, Models and Methods of Sustainability in Croatian Companies (str. 902-912)

Tihomir Opetuk, Hrvoje Cajner, Goran Đukić, Davor Kolar
Izvorni znanstveni članak


Influence of Cutting Speed and Feed Rate on the Wear of an S-Type Mixed Ceramic Tool in Turning of AISI 4140 Hardened Steel (str. 913-919)

Jeferson H. W. Nicolodi, Luiz A. Consalter, Orlando Durán, André J. Souza
Izvorni znanstveni članak


Data Driven Root Cause Analyses in Multistage Manufacturing Utilising Life Cycle Wide Product Information (str. 920-926)

Živorad Belić, Vidosav Majstorović, Dragan Đurđanović, Snežana Kirin
Izvorni znanstveni članak


Accuracy Control in the Process of Low-Rigidity Elastic Deformable Shafts Turning (str. 927-934)

Antoni Świć, Dariusz Wołos, Arkadiusz Gola, Natalia Smidova
Izvorni znanstveni članak


Analysis of Permanent Housing Built after Disaster: Van (Turkey) (str. 935-940)

Sinan Öztaş, Gökay Akkaya
Izvorni znanstveni članak


Impact of Position and Layout of News Articles inside Simulated iPad Newspaper Application on Reading (str. 941-946)

Darijo Čerepinko, Dean Valdec, Petar Miljković, Krunoslav Hajdek
Izvorni znanstveni članak


Development of a Data Mining System for Subscriber Classification (Case Study: Electricity Distribution Company) (str. 947-952)

Elham Peyk, Asadollah Shahbahrami
Izvorni znanstveni članak


PCA-ANN Based Algorithm for the Determination of Asymmetrical Network Failures of Network-Connected Induction Generators (str. 953-959)

Haydar Bayar, Umit Kemalettin Terzi, Okan Ozgonenel
Izvorni znanstveni članak


Increasing the Range of Contemporary Artillery Projectiles (str. 960-969)

Mohammed Amin Dali, Slobodan Jaramaz, Damir Jerković, Danilo Djurdjevac
Izvorni znanstveni članak


The Influence of Vacuum Level on the Friction Force Acting on the Pneumatic Cylinder Sealing Ring (str. 970-976)

Branko Tadic, Milutin Zivkovic, Goran Simunovic, Vladimir Kocovic, Tomislav Saric, Djordje Vukelic
Izvorni znanstveni članak


Time and Spatial Eye-Tracking Analysis of Face Observing and Recognition (str. 977-984)

Andrej Iskra, Helena Gabrijelčič Tomc
Izvorni znanstveni članak


Feature Sensitive Three-Dimensional Point Cloud Simplification using Support Vector Regression (str. 985-994)

Veljko Markovic, Zivana Jakovljevic, Zoran Miljkovic
Izvorni znanstveni članak


Software System for Efficient Lossless Compression of Medical Images (str. 995-1000)

Josip Knezović, Martin Žagar, Hrvoje Mlinarić
Izvorni znanstveni članak


The Influence of the Cost Reduction Directive on the Broadband Roll (str. 1001-1009)

Katja Mohar Bastar, Nikolaj Šarlah
Izvorni znanstveni članak


Experimental Investigation of the Effect of Temperature on the Structures in the Measurement of Displacements (str. 1010-1016)

Boštjan Kovačič, Nenad Gubeljak, Samo Lubej
Izvorni znanstveni članak


Numerical Analysis of a Wind Turbine Blade with Different Software (str. 1017-1022)

Gorazd Hren
Izvorni znanstveni članak


Multi Domain Matrix (MDM) of the Vertical Hydrogenerator (str. 1023-1030)

Ivan Triplat, Dorian Marjanović, Lucijan Stamać
Izvorni znanstveni članak


Effects of Eco-Driving Training: A Pilot Program in Belgrade Public Transport (str. 1031-1037)

Tatjana Savković, Pavle Gladović, Milica Miličić, Pavle Pitka, Sanja Ilić
Izvorni znanstveni članak


Evaluation of System for Economically Viable Thermal Power Plant Operation (str. 1038-1043)

Martin Bricl, Jurij Avsec
Izvorni znanstveni članak


Procedure for Creating Personalized Geometrical Models of the Human Mandible and Corresponding Implants (str. 1044-1051)

Karim Najm Husain, Miloš Stojković, Nikola Vitković, Jelena Milovanović, Miroslav Trajanović, Mohammed Rashid, Aleksa Milovanović
Izvorni znanstveni članak


Energy and Economic Analysis of Life Cycle Zero Energy Building in the Temperate Region (str. 1052-1060)

Zhiyong Zhou, Xiaochen Zhang, Jia Lu, Jiangang Huang, Li Zhou, Yiqin He
Izvorni znanstveni članak


Research on Fatigue Damage and Affecting Factors of Defected Rock Mass Based on Ultrasonic Wave Velocity (str. 1061-1067)

Run Li, Yasi Wang, Fengfei Fu
Izvorni znanstveni članak


Hot Topic Discovery in Online Community using Topic Labels and Hot Features (str. 1068-1075)

Minjuan Zhong
Izvorni znanstveni članak


Microstructure and Tribological Properties of Spheroidal Graphite Cast Irons with Nanoadditives (str. 1076-1080)

Julieta Kaleicheva, Valentin Mishev, Vlatko Marušić
Izvorni znanstveni članak


Testing and Analysis of Concrete-Filled Square Hollow Section Stub Columns with Perfobond Leister Rib (str. 1081-1090)

Gao Cheng, Yongjian Liu, Hui Li, Ning Zhang, Jufeng Su
Izvorni znanstveni članak


Research on Fault Diagnosis of ZPW-2000K Track Circuit Based on RS-BN Algorithm (str. 1091-1097)

Junwu Li, Guoning Li
Izvorni znanstveni članak


Identification of Extreme Temperature Fluctuation in Blast Furnace Based on Fractal Time Series Analysis (str. 1098-1103)

Shihua Luo, Zian Dai, Fan Guo, Jiusun Zeng
Izvorni znanstveni članak


Mobile SNS Addiction and User Continuance: An Empirical Investigation of WeChat (str. 1104-1111)

Li Fang, Qihua Liu
Izvorni znanstveni članak


Index System Reduction Method Based on the Index Similarity (str. 1112-1118)

Ai Wang, Xuedong Gao
Izvorni znanstveni članak


Optimal Routing for Safe Construction and Demolition Waste Transportation: A CVaR Criterion and Big Data Analytics Approach (str. 1128-1135)

Ying Qiu, Xinna Zhao, Xiaohong Zhang
Izvorni znanstveni članak


ICT Technologies in Optimization of Machines Movement at Open-Pit Coal Mine (str. 1152-1158)

Milos Ivanovic, Dobrila Skataric
Prethodno priopćenje


Advanced Methods for Solving the Problems of Road Construction in Central Kazakhstan (str. 1159-1163)

Adil Kadyrov, Vyacheslav Kunaev, Ivan Georgiadi, Rashid Khaibullin
Prethodno priopćenje


Application of Linear Optimization on Parameters of 3D FDM Print (str. 1164-1170)

Oskar Zemcik, Josef Sedlak
Prethodno priopćenje


A Stochastic Model for Achieving Required Level of Availability Based on the Repair Rate Analysis (str. 1171-1175)

Nataša Kontrec, Milena Petrović, Stefan Panić, Hranislav Milošević
Prethodno priopćenje


Implementation and Comparative Analysis of Mobile Phone Application for Learning and Teaching in Mechanical Engineering Education (str. 1176-1181)

Štefanija Klarić, Halima Hadžiahmetović, Daniel Novoselović, Sara Havrlišan
Prethodno priopćenje


Investigation of Requirements Interdependencies in Existing Techniques of Requirements Prioritization (str. 1186-1190)

Fadhl Hujainah, Rohani Binti Abu Bakar, Mansoor Abdullateef Abdulgabber
Pregledni rad


Repair and Strengthening of Timber Floors of Pančevo Diocese by Timber–Concrete Coupling Technique (str. 1191-1198)

Radovan Cvetković, Dragoslav Stojić, Nemanja Marković, Marina Trajković, Darko Živković
Stručni rad


Posjeta: 88.847 *