Izvorni znanstveni članak

https://doi.org/10.31881/TLR.2020.03

Modelling and Simulation of Compression Behaviour of 3D Woven Hollow Composite Structures Using FEM Analysis

Lekhani Tripathi ; Indian Institute of Technology Delhi, Department of Textile Technology, Hauz Khas, New Delhi 110016, India
Soumya Chowdhury ; Indian Institute of Technology Delhi, Department of Textile Technology, Hauz Khas, New Delhi 110016, India
Bijoya Kumar Behera ; Indian Institute of Technology Delhi, Department of Textile Technology, Hauz Khas, New Delhi 110016, India

Sažetak

Three-dimensional (3D) woven spacer composites have the advantage of being lightweight and strong for use in various segments of structural engineering and automobiles due to their superior mechanical properties than conventional counterparts. In this investigation, the influence of different cell geometries of 3D woven spacer fabrics, namely rectangular, triangular and trapezoidal with woven cross-links, upon their mechanical behaviors, especially compression energy, was studied through FEM (finite element method). Cell geometries were changed into different heights and widths and evaluated through simulation and experiments. Simulation of the structure was carried out by the Abaqus platform, and validation of the results was done for the rectangular structure. It was found that compression energy increases with an increment in width, while initially, it shows the tendency to increase and subsequently decrease with an increment in height for the rectangular structure. Compression energy increases with an increase in the angle of the triangular structure; however, it shows the opposite trend in the case of the trapezoidal structure. The outcome of the result shows good agreement between simulation and experimentation values of more than 94% accuracy.

Ključne riječi

3D woven spacer fabric; cell geometry; lightweight composites; compression energy; simulation.

Hrčak ID:

236187

URI

https://hrcak.srce.hr/236187

Datum izdavanja:

26.3.2020.

Posjeta: 1.705 *