Prethodno priopćenje
https://doi.org/10.17818/NM/2021/3.5
On the Development of Catamaran Hull Form for Fish Processing Vessel to Support Domestic Fishing Activities in Indonesia
Ahmad Fauzan Zakki
orcid.org/0000-0003-1183-9090
; Diponegoro University, Semarang-Indonesia
Deddy Chrismianto
; Diponegoro University, Semarang-Indonesia
Aulia Windyandari
; Diponegoro University, Semarang-Indonesia
Rizaldy Ilham
; Karya Teknik Utama Shipyard, Batam-Indonesia
Sažetak
Several advantages of multihull, such as catamaran, have been extensively discussed in the previous research. Therefore, this research focuses on developing a catamaran hull form for the fish processing vessel hull. The initial stage is determining the principal dimension and exploring the configurations of catamaran hull forms. The existing high-speed craft catamarans have been adopted to determine the parent model main dimensions using a linear regression equation model. Otherwise, the catamarans single demi-hull geometry was developed by converting and modifying the parent model hull form with enlarging the hull displacement to achieve the deadweight capacity and service speed requirements. The demi-hull spacing configuration with s/L 0.17, s/L 0.20, s/L 0.30, and s/L 0.40 on the resistance characteristics, intact stability, and sea-keeping behaviour were also explored. Furthermore, the comparisons with the previously proposed monohull were presented. Regarding the hull resistance performance, the analysis indicated that the catamaran hull form had better total resistance characteristics than the monohull on the service speed over 23 knots. In the case of intact stability, the analysis results presented that the catamaran hull form has better intact stability characteristics than the monohull. The dynamic stability of the catamarans also gave better dynamic stability at the heeling angle below 41.57°. Otherwise, the catamarans with s/L 0.17 and s/L 0.20 have lower dynamic stability than the monohull at the heeling angle larger than 41.57° and 58.03°, respectively. In the sea-keeping performance, the catamaran hull has shown an excellent rolling motion required for the offshore environment loading/unloading process. The large demi hull spacing of the catamarans hull can reduce the effect of the wave creating load on the roll motion response at the Beam Sea.
Ključne riječi
Catamaran; monohull; fish processing vessel; domestic fishing
Hrčak ID:
262617
URI
Datum izdavanja:
22.9.2021.
Posjeta: 1.270 *