Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.30765/er.1515

Real-time friction torque estimation on a diesel engine using the crankshaft speed fluctuation

Seddak Mohammed ; Mechanical Engineering Department, Mechanical Faculty, Université des Sciences et de la Technologie d’Oran – Mohamed Boudiaf, BP 1505 El Mnaouar، , Oran 31000, Algérie. ; Laboratoire de recherche en Technologies de l'Environnement, Ecole Nationale Polytechnique d’Oran Maurice Audin, Oran, Algérie.
Lakhdari A. Amina ; Mechanical Engineering Department, Mechanical Faculty, Université des Sciences et de la Technologie d’Oran – Mohamed Boudiaf, BP 1505 El Mnaouar، , Oran 31000, Algérie.


Puni tekst: engleski pdf 705 Kb

str. 42-58

preuzimanja: 60

citiraj


Sažetak

Under the pressure of stricter regulations on pollutant emissions and the desire of users for lower fuel consumption and more comfortable driving, engine control based on torque has been developed. To provide an accurate estimate of effective torque, friction losses must be modeled. The details of a model that predicts the total instantaneous friction torque for compression ignition engines are described. The model is based on a combination of the dynamic model of the crankshaft and the thermodynamic model. The total instantaneous friction torque is determined using the instantaneous measurements or numerical predictions of the gas pressure in the combustion chamber, the rotational speed of the crankshaft and the load torque. The experimental data and the numerical simulation results were compared. The comparison between the different variables shows a good agreement between the simulation and the experimental results.

Ključne riječi

diesel engines, instantaneous friction torque, crankshaft dynamic, thermodynamic model, instantaneous engine speed

Hrčak ID:

267148

URI

https://hrcak.srce.hr/267148

Posjeta: 187 *