Tehnički glasnik, Vol. 16 No. 2, 2022.
Prethodno priopćenje
https://doi.org/10.31803/tg-20220408113840
Determining the Assumptions for the Selection of Measurement Methods for Products Manufactured with Incremental Methods
Michał Wieczorowski
orcid.org/0000-0001-7526-8368
; Poznań University of Technology, ul. Jana Pawła II 24, 60-965 Poznań, Poland
Grzegorz Budzik
; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
Bartosz Gapiński
orcid.org/0000-0003-0206-1942
; Poznań University of Technology, ul. Jana Pawła II 24, 60-965 Poznań, Poland
Tomasz Dziubek
orcid.org/0000-0002-3259-446X
; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
Sažetak
The article presents the method of determining the assumptions for the selection of measurement methods for products manufactured with the use of incremental processes. In the research area, an analysis of 3D printing methods was carried out in terms of the specificity of the additive process, the materials used, the possibility of process deformations, and the accuracy of technological machines. With regard to the measurement methods, the analysis covered the accuracy of the method, the speed of the measurements, the costs of the measurements and the applicability to additive manufactured products. As a result of the analysis, assumptions were made for the criteria for selecting measurement methods for incrementally manufactured objects. The accuracy of prototyping in incremental processes largely depends on the accuracy of their numerical models. Taking this into account, simulations and studies of program processing of data were also carried out, starting from the development of a 3D-CAD model, through the export of numerical models and the preparation of data for manufacturing and control-measurement processes.
Ključne riječi
additive manufacturing; coordinate measurements method; data processing; quality control; 3D printing
Hrčak ID:
276158
URI
Datum izdavanja:
8.5.2022.
Posjeta: 881 *