Skoči na glavni sadržaj

Izvorni znanstveni članak

TESTING OF CERAMIC CUTTING TOOLS WITH AN INTERRUPTED CUT SIMULATOR

Robert Cep orcid id orcid.org/0000-0001-9610-4215 ; Technical University of Ostrava, Faculty of Mechanical Engineering
Branimir Barišić ; Tehnički fakultet Sveučilišta u Rijeci, Rijeka, Hrvatska


Puni tekst: engleski pdf 550 Kb

str. 11-16

preuzimanja: 783

citiraj


Sažetak

This article presents a solution for ceramic cutting tools availability in interrupted machining. Experiments were performed on a special fixture—the interrupted cut simulator. This fixture was constructed at our Department of Machining and Assembly within the scope of a project by the Czech Science Foundation. The goals of the tests were to contribute to the wider usage of these cutting materials in machining, especially in interrupted machining. Through the centuries, producers of ceramic cutting tools have taken big steps forward. Namely, increasing durability in maintaining high levels of strength and hardness lends an advantage. Some producers of these materials advise cutting inserts for interrupted machining at the present time [1,2].

Ključne riječi

ceramic cutting tool, interrupted cutting, cutting tool tests, machining

Hrčak ID:

25751

URI

https://hrcak.srce.hr/25751

Podaci na drugim jezicima: hrvatski

Posjeta: 1.236 *