Skoči na glavni sadržaj

Prethodno priopćenje

The porosity of TiN bronze castings

M. Łagiewka orcid id orcid.org/0000-0002-6896-4725 ; Czestochowa University of Technology, Department of Metalluga and Metal Technology, Czestochowa, Poland
C. Kolmasiak ; Czestochowa University of Technology, Department of Metalluga and Metal Technology, Czestochowa, Poland


Puni tekst: engleski pdf 610 Kb

str. 155-157

preuzimanja: 451

citiraj


Sažetak

The presented work presents the results of the research on the influence of the method of hydrogen removal from tin bronze on porosity and tensile strength. The dehydrogenation was carried out by three methods. In the first method, hydrogen was removed utilizing a vacuum furnace, in the second method, the melt was blown with compressed air, and in the third method, the melt was refined with the salt called Ecosal CU 440. Recirculating scrap was used to make samples. For comparative purposes, castings were also made of melted ingots of the alloy. The density of the castings was determined and the effect of the dehydrogenation method on porosity and the tensile strength was determined on this basis.

Ključne riječi

TiN bronze castings; porosity; hydrogen in browns; tensile strength; refining

Hrčak ID:

281420

URI

https://hrcak.srce.hr/281420

Datum izdavanja:

1.1.2023.

Posjeta: 873 *