Izvorni znanstveni članak

Study on structural optimization of submerged nozzle of continuous casting mold by water model experiment

C. Y. Cai ; School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan, China
X. Deng ; School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan, China
M. G. Shen ; School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan, China
X. Y. Qiao ; School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan, China

Sažetak

In this paper, by changing the shape of the inner wall of the nozzle, a water model experiment was carried out on the slab with the section of 200 / mm × 1 200 / mm. The results show that under the same immersion depth and the same angle, the improved No.1 nozzle and the improved No.2 nozzle have swirling flow, which reduced the dead region and the internal longitudinal flow velocity, and the swirl ratio generated in improved No. 2 nozzle is more obvious than improved No. 1 nozzle. The impact depth of the velocity at the outlet of the improved No.2 nozzle is obviously lower than that of the original nozzle and the improved No.1 nozzle.

Ključne riječi

steel casting; submerged entry nozzle; mold; water model; velocity model

Hrčak ID:

300988

URI

https://hrcak.srce.hr/300988

Datum izdavanja:

3.7.2023.

Posjeta: 290 *