Skoči na glavni sadržaj

Metalurgija , Vol. 62 No. 3-4, 2023.

  • Datum izdavanja: 03.07.2023.
  • Objavljen na Hrčku: 02.05.2023.

Sadržaj

Puni tekst

Computational fluid dynamics (CFD) analysis of medium flow and removal of inclusions in a two-strand tundish (str. 335-338)

J. Cupek, M. Tkadlecková, T. Merder, J. Walek, M. Saternus, J. Pieprzyca
Izvorni znanstveni članak


The influence of slenderness of ceramic filters on the efficiency of steel refining (str. 339-342)

K. Janiszewski
Izvorni znanstveni članak


Kinetics analysis of solidification process of 1035 steel at different cooling rates (str. 343-345)

G. L. Tan, D. Tang, L. L. Guo, Q. Q. Zhang, F. D. Wang
Izvorni znanstveni članak


Design and optimization of oxygen lance for 210 T converter (str. 346-348)

D. Y. Yang, Q. C. Peng, H. J. Liu, P. H. Wu, D. J. Tan, C. Xie
Izvorni znanstveni članak


Study on structural optimization of submerged nozzle of continuous casting mold by water model experiment (str. 349-351)

C. Y. Cai, X. Deng, M. G. Shen, X. Y. Qiao
Izvorni znanstveni članak


Simulation study of cold steel feeding in steel die casting (str. 352-354)

G. X. Liu, Z. S. Zhang, Y. Huang, Y. W. Bai, Y. W. Zhang
Izvorni znanstveni članak


Adaptive neural command filtered fault-tolerant control for a twin roll inclined casting system (str. 355-358)

D. X. Gao, Y. J. Zhang, L. B. Wu, S. H. Liu
Izvorni znanstveni članak


Prediction of alloy addition in ladle furnace (LF) based on LWOA-SCN (str. 359-362)

C. Y. Shi, B. S. Wang, S. Y. Guo, X. X. Yin, Y. K Wang, L. Zhang, R. Chen, Z. C. Ma
Izvorni znanstveni članak


Manufacturing and properties of cast Cu-Ag alloys designed for electrotechnical applications (str. 367-370)

A. Kawecki, E. Sieja-Smaga, A. Mamala, P. Kwasniewski, B. Smyrak, W. Sciezor
Izvorni znanstveni članak


Effect of the repair welding process on the microstructure and hardness of the T-JOINT S355J2+N steel (str. 371-374)

M. F. A. Sabana, N. Muhayat, . Triyono
Izvorni znanstveni članak


Application and mechanical properties of thermoplastic polymers for the additive manufacturing of transportation systems (str. 375-378)

J. Kessler, K. Semrád, K. Draganová, P. Kašper
Izvorni znanstveni članak


Microstructure and mechanical properties of forged and rolled rings made from X20Cr13 steel (str. 379-382)

J. Lulkiewicz, A. Kawałek, B. Pachutko, T. Bajor, S. Szkudelski
Izvorni znanstveni članak


Study on cold spinning deformation behavior and load mechanism of conical thin-walled aluminum alloy parts (str. 383-386)

L. B. Li, J. B. Zheng, X. D. Shu, J. Zhang, W. W. Shen
Izvorni znanstveni članak


Influence of the speed of downward semi-continuous casting on the crystal size and mechanical properties of recycled copper (str. 387-390)

M. Maleta, W. Głuchowski, Z. Rdzawski, M. Łagoda, J. Domagała-Dubiel
Izvorni znanstveni članak


Statistical analysis of different mathematical models for stress-strain curves of AISI 321 stainless steel (str. 391-393)

J. Cumin, D. Novoselovic, M. Samardžić, Iva Samardžić
Izvorni znanstveni članak


Study on laser surface micro-treatment of stainless steel (str. 394-396)

M. T. Wang, Y. X. Chen, L. Gao
Izvorni znanstveni članak


The effect of the rolling process on selected properties of magnesium copper with microadditives (str. 397-400)

D. Kołacz, W. Głuchowski, Z. Rdzawski, M. Łagoda, M. Maleta, K. Krukowski, M. Drajewicz
Izvorni znanstveni članak


Study on atmospheric corrosion behaviour and mechanism of Q235 steel after passivation (str. 401-404)

L. Zhang, S. Cai, C. Han, S. P. Ji, B. Wu, H. C. Ji
Izvorni znanstveni članak


Protective effects of vapour phase corrosion inhibitors tested in laboratory conditions (str. 405-408)

G. Pačarek, T. Šolić, I. Vidaković, M. Samardžić
Izvorni znanstveni članak


Keruing (dipterocarpus grandiflorus) oleoresin as aluminum 1100 corrosion inhibitor in 3,5 % NaCl solution (str. 409-411)

. Suwarto, . Merpatih, S. Petrus, . Wajilan, A. Wahyudianto, A. Fernandes
Izvorni znanstveni članak


Research on the threaded connection system from AlMgSi alloy for electrical power cables under various clamping loads (str. 415-418)

K. Korzen, P. Kwasniewski, G. Kiesiewicz, Sz. Kordaszewski, B. Jurkiewicz, B. Babiarz, E. Bozek
Izvorni znanstveni članak


Research on the influence of the proportion of nickel and silicon on the mechanical and electrical properties of CuNiSi alloys (str. 419-422)

W. Sciezor, R. Kowal, J. Grzebinoga, G. Kiesiewicz, P. Kwasniewski, A. Mamala
Izvorni znanstveni članak


Deformation analysis of running electric hoist (str. 423-426)

C. D: Wu, D. L. Guo, C. J. Wang, Y. L. Wang, M. W. He, J. L. Zhang, H. C. Ji
Izvorni znanstveni članak


Study on drum load of shearer (str. 427-429)

J. Xue, Y. Gao, L. Y. Huang, T. Q. He
Izvorni znanstveni članak


Effect of heating technology on scale adhesion in the steel charge heating process (str. 430-432)

J. Boryca, C. Kolmasiak, T. Wyleciał, D. Urbaniak
Prethodno priopćenje


Study of acid leaching of niobium from titanium production sludge (str. 433-436)

A. A. Ultarakova, A. M. Yessengaziyev, N. G. Lokhova, Z. B. Karshyga, K. K. Kassymzhanov
Prethodno priopćenje


Wear of 16MnCrS5 steel surface layers in the pulsing contact loads (str. 437-439)

I. Stepankin, D. Kuis, E. Pozdnyakov, A. Naizabekov, S. Lezhnev, E. Panin
Prethodno priopćenje


Comparison of the functional properties of selected multilayer systems (str. 440-442)

D. Gatner, K. Pietrucha, B. Dziergas, A. Nowak, D. Kowalcze, W. Łonski, M. Spilka, M. Kciuk
Prethodno priopćenje


Formation of the structure and properties of multi-element ion-plasma coatings (str. 443-446)

A. Sh. Syzdykova, V. M. Yurov, A. D. Mekhtiyev, A. D. Alkina
Prethodno priopćenje


Interaction of tricalcium phosphate with products of carbothermic reduction of silicon oxide (str. 447-450)

V. M. Shevko, A. D. Badikova, R. A. Uteeva
Prethodno priopćenje


About the use of R-66 reagent in the technology of flotation enrichment of mixed copper (str. 451-454)

D. R. Gizatullina, M. A. Akubaeva, A. M. Zhunussov, A. M. Makasheva
Prethodno priopćenje


Studying properties and structure of antifriction cast iron additionally alloyed with titanium (str. 455-457)

Ye. P. Chsherbakova, A. M. Dostaeva, V. Yu. Kulikov, Sv. S. Kvon, A. A. Alina
Prethodno priopćenje


Studies on magnesium addition to copper produced in the continuous casting process and analysis of mechanical, electrical and structural properties of obtained casts (str. 458-460)

K. Franczak, P. Kwasniewski, G. Kiesiewicz, M, Sadzikowski, W. Sciezor, S. Kordaszewski
Prethodno priopćenje


Power cycling analysis of enameled aluminium winding wires connections pprepared with the use of SHARK-Al® type connectors (str. 461-463)

G. Kiesiewicz, T. Knych, A. Mamala, P. Kwasniewski, K. Korzen, M. Zasadzinska, A. Kawecki, P. Kowalewski
Prethodno priopćenje


Research on Cu-Mg castings cold drawing process and analysis of mechanical and electrical properties of obtained wires (str. 464-466)

G. Kiesiewicz, P. Kwasniewski, W. Sciezor, K. Franczak, M. Sadzikowski, S. Kordaszewski
Prethodno priopćenje


Investigation of heat-resistant properties and microstructure of experimental steel based on the Cr-Ni-Ti-Nb system obtained under industrial conditions (str. 471-473)

S. K. Arinova, Sv. S. Kvon, D. R. Aubakirov, T. V. Kovaleva, D. A. Issagulova
Prethodno priopćenje


Research on mechanical and electrical properties of enamel winding wires connections made with the use of SHARK-Al® technology (str. 474-476)

S. Kordaszewski, G. Kiesiewicz, T. Knych, A. Mamala, P. Kwasniewski, W. Sciezor, K. Franczak, M. Sadzikowski, P. Kowalewski
Prethodno priopćenje


Fume emission during the arc and laser welding of cast stainless austenitic steel (str. 480-483)

J. Matusiak, J. Wycislik- Sosnierz
Pregledni rad


Modeling and simulating production processes with the use of the FLEXSIM method (str. 484-487)

R. Poloczek, B. Oleksiak
Pregledni rad


Posjeta: 35.356 *