Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.15255/KUI.2025.012

Simultaneous Removal of Pb, Ni, Mn, and Cr from Phosphogypsum with Na2EDTA: A Box-Behnken Design Modelling and Optimisation

Ertuğrul Çelik orcid id orcid.org/0000-0003-4837-4311 ; Ankara University, Department of Chemical Engineering, 06100 Ankara, Turska *
Suna Ertunç ; Toros Agri Industry and Trade Co. Inc. R&D Center, 33 020 Mersin, Turska

* Dopisni autor.


Puni tekst: engleski pdf 5.416 Kb

verzije

str. 11-27

preuzimanja: 48

citiraj


Sažetak

Phosphogypsum (PG) is considered a by-product and is classified as solid waste generated during the production of phosphoric acid by the reaction of sulphuric acid with phosphate rock via the wet method. The presence of heavy metals in PG causes a range of environmental issues and poses limitations on its potential applications. In this study, the Box-Behnken design (BBD) technique was employed to simultaneously reduce concentrations of lead, nickel, manganese, and chromium in PG using Na2EDTA. This approach aimed to optimise factors such as Na2EDTA concentration, solid-to-liquid ratio (S/L), and contact time, while also developing a mathematical model. The optimal process points were identified through analysis of variance (ANOVA) and the response surface plots. Furthermore, the physicochemical properties of PG before and after purification were analysed using XRF, XRD, and FTIR methods. Based on the results obtained through response surface design methodology, the coefficients of correlation (R2) of the experimental data and the second-order regression model for Pb, Ni, Mn, and Cr were found to be 89.75, 95.37, 98.18, and 94.53 %, respectively. Generally, high R-squared values indicate that the experimental data are consistent with the data predicted by the model under optimum conditions: c(Na2EDTA) = 0.055 M, solid/liquid ratio = 1 : 20 g ml−1, contact time = 157 min. Under these conditions, the removal efficiencies for Pb, Ni, Mn, and Cr were 46.65, 42.31, 67.02, and 77.9 %, respectively.

Ključne riječi

phosphogypsum; Na2EDTA; removal of heavy metals; Box-Behnken experimental design

Hrčak ID:

342971

URI

https://hrcak.srce.hr/342971

Datum izdavanja:

13.1.2026.

Podaci na drugim jezicima: hrvatski

Posjeta: 176 *