Izvorni znanstveni članak

Investigation of Substrate Microstructure after Flame Spraying and Fusing

Katica ŠIMUNOVIĆ ; Strojarski fakultet, Sveučilište J.J. Strossmayera u Osjeku, Osijek, Hrvatska
Ivica KLADARIĆ ; Strojarski fakultet, Sveučilište J.J. Strossmayera u Osjeku, Osijek, Hrvatska
Dragomir KRUMES ; Strojarski fakultet, Sveučilište J.J. Strossmayera u Osjeku, Osijek, Hrvatska

Sažetak

In this paper, influence of flame spraying and fusing on microstructure of substrates made from heat treated carbon steel C45, a heat treated low alloyed 42CrMo4 steel and stainless austenitic steel X6CrNiMo18-10-2, has been investigated. Flame spraying and fusing is a deposition technique commonly applied to nickel-base self-fluxing alloys (NiCrBSi alloys). Because of high temperature of fusing (approximately 1000 oC), a diffusion bond between the coating and the substrate is created and a homogeneous coating with decreased porosity is obtained. It has been proved that there is a significant influence of fusing temperature on the microstructure of substrate materials, especially on the coating/substrate interface.

Ključne riječi

Flame spraying and fusing; Nickel-base self-fluxing alloy coatings; Substrate microstructure

Hrčak ID:

40625

URI

https://hrcak.srce.hr/40625

Datum izdavanja:

29.8.2008.

Posjeta: 1.661 *