Skoči na glavni sadržaj

Izvorni znanstveni članak

Estimation of cyclic stress-strain curves for low-alloy steel from hardness

R. Basan ; Faculty of Engineering, University of Rijeka, Rijeka, Croatia
M. Franulović ; Faculty of Engineering, University of Rijeka, Rijeka, Croatia
S. Smokvina Hanza ; Faculty of Engineering, University of Rijeka, Rijeka, Croatia


Puni tekst: engleski pdf 323 Kb

str. 83-86

preuzimanja: 3.469

citiraj


Sažetak

This article describes investigations into the existence of correlation between experimentally determined cyclic parameters and hardness of quenched and tempered representative low-alloy steel 42CrMo4. A good correlation was found to exist between cyclic strength coefficient K’ and Brinell hardness HB, but not between cyclic strain hardening exponent n‘ and hardness HB. Nevertheless, good agreement between calculated and experimental cyclic stress-strain curves shows that cyclic parameters i.e. cyclic stress-strain curves of the investigated steel can be successfully estimated from its hardness.

Ključne riječi

cyclic loading, stress-strain curves, hardness, estimation

Hrčak ID:

43646

URI

https://hrcak.srce.hr/43646

Podaci na drugim jezicima: hrvatski

Posjeta: 3.965 *