Original scientific paper
https://doi.org/10.1080/00051144.2017.1391616
Performance evaluation of a portable 3D vision coordinate measuring system
Octavio Icasio-Hernández
; Centro Nacional de Metrologıa, CENAM, el Marques, Mexico
José-Joel González-Barbosa
; Instituto Politecnico Nacional, CICATA Queretaro, Col Colinas del Cimatario, Mexico
Yajaira-Ilse CurielRazo
; Instituto Politecnico Nacional, CICATA Queretaro, Col Colinas del Cimatario, Mexico
Juan B. Hurtado-Ramos
; Instituto Politecnico Nacional, CICATA Queretaro, Col Colinas del Cimatario, Mexico
Abstract
In this work, we present a portable 3D vision coordinate measuring machine (PCMM) for short range-real time photogrammetry. The PCMM performs 3D measurements of points using a single camera in combination with a hand tool and a computer. The hand tool has infrared LEDs serving as photogrammetric targets. The positions of these targets were pre-calibrated with an optical coordinate-measuring machine defining a local coordinate system on the hand tool. The camera has an infrared filter to exclude all ambient light but infrared targets. Positions of the imaged infrared targets are converted to 3D coordinates using pixel positions and precalibrated positions of the targets. Also, we present a set of criteria for selecting the infrared
LEDs and the camera filter, a camera calibration method, a tracking and POSE algorithms, and a 3D coordinate error correction for the PCMM. The correction is performed using the PCMM as a range meter, which implies comparing the 3D coordinate points of the PCMM with a
coordinate measuring machine, and then generating a look up table (LUT) for correction. The global error of the PCMM was evaluated under ASME B89.4.22-2004. Sphere and single point errors were around 1 mm, volumetric error were under 3 mm.
Keywords
Photogrammetry; LUT; portable CMM ’sphere test; single point test; volumetric test
Hrčak ID:
203360
URI
Publication date:
21.3.2018.
Visits: 1.305 *