Preliminary communication

Deformation investigation of the shell of rotary kiln using terrestrial laser scanning (TLS) measurement

L'. Kovanič orcid.org/0000-0003-4763-1013 ; Technical University of Košice; Faculty of Mining, Ecology, Process Control and Geotechnology, Slovak Republic
P. Blišťan ; Technical University of Košice; Faculty of Mining, Ecology, Process Control and Geotechnology, Slovak Republic
V. Zelizňakova ; Technical University of Košice; Faculty of Mining, Ecology, Process Control and Geotechnology, Slovak Republic
J. Palkova ; Technical University of Košice; Faculty of Mining, Ecology, Process Control and Geotechnology, Slovak Republic
J. Baulovič ; Technical University of Košice; Faculty of Mining, Ecology, Process Control and Geotechnology, Slovak Republic

Abstract

For the correct operation of the rotary kiln it is necessary to ensure that basic geometric conditions are fulfilled. For regular check the geodetic measurements are used. Based on the developments in survey technology, the geodetic total stations (TS) and terrestrial laser scanning method (TLS) are used. TLS method was used for an investigation of the longitudinal axis of the rotary kiln (RK), axes of the carrier tires, and mainly the kiln shell deformation during its shutdown. The results of the experimental use of the TLS method to obtain ovality ratio of the shell of the rotary kiln are presented in this article.

Keywords

rotary kiln; geodetic measurement; geometric parameters; shell deformation; corrections

Hrčak ID:

218411

URI

https://hrcak.srce.hr/218411

Publication date:

1.7.2019.

Visits: 1.707 *